Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TTY ports mapped to line numbers

Do you have anything that would detail how the line numbers map to tty ports in a 2811 and 1841 router? I know the slots and layout on the chassis, but I can't seem to find how they map to line number 1-96.

2 REPLIES
New Member

Re: TTY ports mapped to line numbers

Router# show line

Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int

* 0 0 CTY - - - - - 0 0 0/0 -

1 1 AUX 9600/9600 - - - - - 0 0 0/0 -

0/3/0 50 TTY 9600/9600 - - - - - 0 0 0/0 Se0/3/0

0/3/1 51 TTY 9600/9600 - - - - - 0 1 0/0 Se0/3/1

1/0 66 TTY 9600/9600 - - - - - 0 0 0/0 -

1/1 67 TTY 9600/9600 - - - - - 0 0 0/0 -

1/29 95 TTY 9600/9600 - - - - - 0 0 0/0 -

1/30 96 TTY 9600/9600 - - - - - 0 0 0/0 -

1/31 97 TTY 9600/9600 - - - - - 0 0 0/0 -

322 322 VTY - - - - - 0 0 0/0 -

323 323 VTY - - - - - 0 0 0/0 -

324 324 VTY - - - - - 0 0 0/0 -

325 325 VTY - - - - - 0 0 0/0 -

326 326 VTY - - - - - 0 0 0/0 -

tty 1/0 line 66 will be accessable by telnet x.x.x.x 2066

You could also use 4066 and 6066 depending on what type of connection you want

New Member

Re: TTY ports mapped to line numbers

1135
Views
0
Helpful
2
Replies