Unable to configure PPPoE in Cisco 877 for DSL connectivity
I am trying to setup a DSL connection with Cisco 877 as the CPE. The CLI does not list the option of PPPoE for protocol in the vpdn group config prompt. If i manually enter PPPoE as the encapsulation, the vpdn group configured vanishes from the config!
Any clues? Has anyone got a sample config for a cisco 877 connecting to DSL through PPPoE. I followed the sample config in the TAC website giving the example for cisco 827-pppoe -DSL.
Some more inputs - as soon as i connect the DSL line the ATM interface line protocol comes up but unable to see anything in debug vpdn or debug ppp auth. The router IOS feature set is Advanced Security services.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...