04-09-2009 03:12 AM
Dear All,
I have one Cisco Router 2851 with following cards and features:
Cisco 2851-V/K9 - 2851 Voice Bundle
VWIC2-2MFT-T1/E1 - 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1
S28NSPSK9 - 12403 - IOS
PWR-2821-51-AC - 1 No
Router-SDM-CD - 1 No
PVDM2-48 - 1 No
MEM2800-256D-INC - 1 No
MEM2800-64-CF-INC - 1 No
ACS-2821-51-STAN - 1 No
Attaching Config details along with this.
Appreciate, if someone help me on this.
Regards,
Suresh
04-09-2009 03:28 AM
What is that you want to do ?
04-09-2009 09:21 PM
Hi,
I want to use this Router in replace to Patton device as RAS using E1 line for to access resources within that network dialing from the remote places.
Regards,
Suresh
04-10-2009 12:50 AM
You need a digital modems card for that, PVDM2-xxDM, where xx = 12, 24 or 36.
You will also need one of the following interface cards:
NM-1CE1T1-PRI
NM-2CE1T1-PRI
HWIC-1CE1T1-PRI
HWIC-2CE1T1-PRI
The VWIC that you have is not supported with the Digital Modems.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: