Hi,
I have a router with digital modems in the center and have 10 Remote-sites that use the same subnet
Remote-site 1 : Subnet 192.168.1.0/24
Remote-site 2 : Subnet 192.168.1.0/24
Remote-site 3 : Subnet 192.168.1.0/24
and so on
Each subnet is equiped with a device that have an analog modem on the wan-side and an ethernet interface connected to the subnet. The wan interface on this device have a fixed ip address which also the same in all remote-sites
Ist there any way to connect to these subnets at the same time from the same router using a dialing method?.
Thx
Ali