Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

VPDN: user with static IP

Hello,

I want to create a remote access to my router in such way that one user always get the same IP address while other users will have IP from the pool. Currently my configuration is following (all users get IP from MyPool):

vpdn enable

!

vpdn-group PPTP

accept-dialin

protocol pptp

virtual-template 1

!

interface Virtual-Template1

ip unnumbered Vlan10

ip nat inside

peer default ip address pool MyPool

no keepalive

ppp encrypt mppe auto required

ppp authentication ms-chap-v2 ms-chap callin PPTP

!

ip local pool MyPool 10.0.0.1 10.0.0.20

Regards, Mark

1 REPLY

Re: VPDN: user with static IP

I think you are going to need a radius server to do this as you want to single out a single user.

259
Views
0
Helpful
1
Replies
CreatePlease to create content