Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Client not responding

Hi,

I have configured an easy vpn. The 2811 router is my vpn server while the clients have vpn clients 4.8.02.0010 installed on their pc. Each time the clients tries to connect, my vpn server doesn`t respond, that response I get from the vpn clients.

I have attached my configs on the vpn server for anyone who has configured this before to please help me look into it and let me know where I got it wrong, i.e. the configs I omitted or the one I should not include, your suggestion and comments will be deeply appreciated.

Thanks in advance.

1 REPLY

Re: VPN Client not responding

first u need to change the following

do:

crypto isakmp policy 1

encry 3des

hash sha

authentication pre-share

group 2

interface FastEthernet0/1

no crypto map SDM_CMAP_2

crypto map SDM_CMAP_1

then u need to make changes to ur nating

no ip local pool xxxvpnpool 192.168.3.50 172.16.3.70

ip local pool xxxvpnpool 192.168.3.50 172.16.3.70

no ip nat inside source list 1 pool xxxxxxx overload

access-list 110 deny ip 172.16.3.0 0.0.0.255 192.168.3.0 0.0.0.255

access-list 110 permit ip 172.16.3.0 0.0.0.255 any

ip nat inside source list 110 pool xxxxxxx overload

also creat at least one username and password

like

username user1 password 12345

good luck

please, if helpful rate

then should work fine

368
Views
0
Helpful
1
Replies