strange things happen... we have been running the VPN client for several years with a fair share of problems of course, but now we experience something completetly new! The last 3 weeks the client routing occasionally stops completetly when connecting to 3 of our 4 sites. I see no packets in or out of the client, except to this 4:th site. This happens to a LOT of clients all around the world. We are running 4.8 on XP... has anyone experienced something like this? The issue helps when rebooting, but not by unloading the Cisco VPN service or reseting the network card.
This is due to a misconfiguration on the VPN at the central site. Make sure that the Group | Client Config settings for Split Tunneling Policy are correct. When the port is physically unplugged, the dynamic routes are removed much sooner. Something in the way the concentrator is designed to cause the concentrator to act differently,
depending on whether if the port is physically disconnected or only in admin shutdown
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...