Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN configuration with Radius server

Dear all

We have configured Remote Access VPN in Cisco 2811 router. But the problem

is user can easily authenticate & connected to VPN device but they cant ping

the internal file server or workstations.

The configuration file are attached

Please help me to solve the problem.

regards

Imran

4 REPLIES

Re: VPN configuration with Radius server

You need an acl that defines which traffic should be sent over the vpn tunnel.

Add the following to your config:

access-list 111 permit ip 192.168.16.0 0.0.0.255 14.1.1.0 0.0.0.255

crypto map clientmap 10 match address 111

This was the first thing I stumbled over. There might be more but I suggest you resolve this first.

Regards,

Leo

New Member

Re: VPN configuration with Radius server

Dear Leo

At first thanks to coordinate to solve my VPN problem.

Still I am facing the same problem.I am requesting you that if possible send me the total configuration according to given diagram.

Looking forword for your immediate response

regards

Imran

Re: VPN configuration with Radius server

OK, I entered the changes I proposed and the attached file is how the config looks.

Regards,

Leo

New Member

Re: VPN configuration with Radius server

Dear Leo

thanks for responsing my meil. Still I am facing a problem.After successtully connect vpn radius server does not show accounting log.

Please inform me what can i do in this situation. Show tech are given by attachments

regards

Imran

156
Views
10
Helpful
4
Replies