The departed Admin purchased a security card for the Cisco 2811 to use it as the VPN server, but my question is whether or not that's even possible, since the 2811 sits outside the NetScreen firewall. Currently the VPN clients are going all the way in to one of the Network Servers and authenticating there. Authenticating at the 2811 isn't going to give them LAN visibility without opening up a bunch of stuff on the firewall, correct? Or am I missing something?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...