Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN easy server with 1721

Hello ALL

I have a 1721 at office would like to configure it as a easy VPN server so clients can connect remotely to the office

I used SDM to configure it and it is sucessfully tested by SDM.

But i am unable to connect to it using Cisco Client

When i am configuring the client i am using WAN ip as the hostname and techno as the group and shared key as as password

This is what i get in the connecting logs

2 23:00:17.304 03/26/07 Sev=Warning/2 IKE/0xE300009B

Invalid SPI size (PayloadNotify:116)

3 23:00:17.304 03/26/07 Sev=Warning/3 IKE/0xA3000058

Received malformed message or negotiation no longer active (message id: 0x00000000)

Attaching running config

Just a FYI - internet and local LAN is running successfully with the running config.

Please advise me on how to fix this otherwise give me link to documents which describes step by step using SDM if it is there.

Thanks in Advance

Mohammed

2 REPLIES
New Member

Re: VPN easy server with 1721

Can someone please reply me on this .

Thanks in advance.

New Member

Re: VPN easy server with 1721

137
Views
0
Helpful
2
Replies