i recently configured on a cisco asa 5520 remote access using ipsec.
the remote client uses cisco vpn client.
the vpn client successfully authenticats and connects to the asa, however i dont have access to the lan. this is the first time that i configure cisco vpn on an asa.
for one,because the lan subnet and the internal ip of the asa are different,im not sure which ip would be the most appropriate to assign the vpn client.secondly,ive read on other posts here about the nonat command and its involvement with the acl, but im not clear on it.im attaching my running config as to give a better understanding...thanks alot in advance!!
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...