Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN Tunnel is not up

Hello Expert:

I'm in the process to configure tunnel l2l and for somehow after I' done the configured the tunnel is not up.

Here is the recap:

ArizonaFWL: inside: 10.20.15.0/24

                      outside: 65.244.227.18/28

DenverFWL: inside: 10.20.7.0/24

                       outside: 65.102.216.130/28

Attached is the configure for 2 sites. Any help will greatly appreciate.

Thx,

-HP

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

I have looked through the

I have looked through the configs. The biggest problem that I see is that neither router has included this VPN traffic in their nonat ACL. While there are other possible issues that might impact the tunnel you should fix the problem with nonat before we look for anything else.

 

HTH

 

Rick

1 REPLY
Hall of Fame Super Silver

I have looked through the

I have looked through the configs. The biggest problem that I see is that neither router has included this VPN traffic in their nonat ACL. While there are other possible issues that might impact the tunnel you should fix the problem with nonat before we look for anything else.

 

HTH

 

Rick

48
Views
0
Helpful
1
Replies