Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
Hello.We are "happy" owners of your production of RV32x of a series. Upon purchase thought that Cisco does not turn out products with which it can be a shame.Question first, I hope to you it is very a shame with this series of gateways?now on busines...
Resolved! RV340 "1.0.02.9000" firmware
I logged in my RV340 last week to find a message to say a new firmware 1.0.02.9000 was available. I was rebooting because of a problem I was having, I didn't do the update. Now when I go back in to do the firmware upgrade, the message has gone. On th...
Hello All New to VLANs so unsure if I am configuring things wrong or if there is a bug with the RV345 so any help is appreciated! I have a Cisco RV345 router with the latest firmware (1.0.01.18 ) and two VLANs configured: VLAN1 192.168.1.1/24 ...
Hi All, I've been experiencing an issue with the latest version of firmware (1.4.2.19) for the RV325 small business router. If I attempt to manage the device using the web based admin interface from a VLAN other than the default VLAN (1), I receive...
Can you connect 2 RV110W Site to Site VPN with Public IP on one side and other side NAT'd on AT&T Hotspot?
I am having a port forwarding issue, for some reason RDP and PLEX are both working on my setup, and I tried opening 8050 port with the same config as the rest of the port forward but unfortunately this did not work. I tried deleting and readding it, ...
I replaced a RV042 router with a RV345. Since that the Microsoft Dynamics Report Designer has stopped communicating with the SQL 2014 server. The report designer uses TCP port 4712. So I created a service to open up 4712 then added a IPv4 access rule...
SPA-4XT3/E3-V2 - Looking for this item used or refurbished - anyone looking sell?
Hi people! I am implementing a solution and I’ve detected some problems on all Cisco RV340 I am working with: Scenario: In my network, I have a layer 3 switch as a default router, in this, I have defined four VLAN: VLAN 1: 10.5.0.0/19 VLAN 2: ...
Hi, I have a situation on a new site which has a Security System in place (DVR). Business only wants 3 users/pc's to have access to the Security System. How do i implement an ACL that only 3 static IPs (3 users/pc's) can acccess the Host IP (DV...
If I choose the RV042 mode as load balancer and bind some protocol to specific WANs, what will happen to the protocols that I didn't bind to any specific WAN? will they go to WAN1 by default?Thanks
How do I assign static wan ip to a vlan that is linked to lan port. for example.I need to put in an ip, subnet and gateway and dns. into the vlan external ip. is that possible?I have 13 static ip addresses. I would like to create multiple vlans and h...
I have an RV325 setup as a gateway. On the WAN side it is connected to an MPLS network. On the LAN side there are clients that connect via an anyconnect tunnel over the WAN back to HQ and this works fine. The issue is that when I connect back from th...
Hi everyone, I'm looking to find a router that covers a decent amount of specifications. The idea is to be able to do this: Modem (mine) --> Router in question --> Internal network But off of that router I also branch another connection to my serve...
to whom it may concern, Just purchased RV320 to replace ISR 1800. I have a hard time setting up port forwarding to allow RDP and Plex ports to be opened. Following Cisco guidelines and google search did not help. Below is the settings currently confi...
