Routers - Small Business

We're finding that no matter the NTP server we specify, our SA520 insists on being on EST and not DST even though we changed over to DST on 14 March 2010 and we have the "Automatically Adjust for Daylight Savings Time" checked on the SA520.  My quest...

I have a D-Link DIR-655 Wireless-N Router connected to my Cable Modem.  I would like to have the RVS4000 behind it, as the DIR-655 has some better features for managing my internal network.  I want to forward my external VPN to the RVS4000.  I'm conf...

There is any possibility to setup TFTP server Name (DHCP option 66) on the RVL200 DHCP server or to setup DHCP relay - forwarding let's say via the IPsec tunnel to a configured DHCP server ?

Hello,The router is an SA 520W running firmware 1.1.21.  It obtains it's Dedicated WAN address from an IPv4 DHCP server.  There are no other ports connected, but there are about 5-10 wireless clients at any given moment.This might be obvious to some,...

I have the settings for a VPN Tunnel:Fase1.- pre-g2-3des-md5 (Equivalencia) -)Method: PreshareDH group: 2Encrypt/Auth: 3DES/MD5Life Time: 28800Mode (Initiator).- AggressiveEnable NAT- Traversal.- NOFase2.- g2-esp-3des-md5 (Equivalencia) -)Method: DH ...

I need to secure my routers by only allowing certain hosts on my internal network to access. I use SSH. I have tried using acl's but connection is refused when I set line vty 0 4 to use the access-class # in command.Can someone be so kind to show me ...

Recently i purchased and setup a WRVS4400n for vpn access.  I am able to connect from my home PC (XP) using the quickvpn client.2 Questions.1.  is there a quickvpn client for MAC and if not, any ideas what my options might be?2.  is there a way to co...

I have a w2003 Ftp Server behind a RV42 Dual Wan (both actives) Router,  users can log in (i can see them in ISSADMIN)  , but they can not see the folders.I tried to configure Port Forwarding,UpNp, Firewall rules but it still doesn't work, all client...

Hello,We are using an RVS4000 for our small business and are quite happy with it, the only exception that there are not quite enough forwarding slots under Single Port Forwarding + Port Range Forwarding.  Can we use TWO RVS4000s in parallel, feeding ...

Hi,I notice from other threads this certificate issue has happen to quite a few people and without a firmware upgrade it would seem impossible to resolve.  Can anyone help or suggest how to put a custom certificate on the device???Here's the certific...

Dear all,We bought your product Linksys WRV200. But it looks it is unstable after I updated firmware to 1.0.39. It always loss internet and we have to reboot several days. It really influence our business. Do you have any suggestion? William Yoew

hello,I've had this WRVS4400N for a while now, but suddenly (not long after firmware update 2.0.0.8 K9) I've had this intermittent problem of it simply shutting down communication between any port every 24 hours, almost by the clock - I can still acc...

Hello,This config was working fine until we tried to uprgade the IOS.  The SR520 was VPN'ing into a UC520.I have an SR520W Ethernet to Ethernet router, we upgraded the software to 12.4.24.T2, the docs said it works for this platform, and after the re...

How do I unsubscriber myself on the email list. I logged in online to do sobut it still has me subscribed and I cant seem to find a way to get itunsubscribed.