cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
Comunicados
Bem-vindo à Comunidade de Suporte da Cisco, gostaríamos de ter seus comentários.
New Member

Configuração SDM

Boa noite pessoal,

Estou com problemas, instalar o SDM, em um roteador  cisco 1800series(1841).

Já olhei no site da cisco, os procedimentos para instalação.

Configuring router to run SDM
Follow the instructions below to configure a router to run                      SDM.

Step 1:

  1. Connect to                        your router using Telnet, SSH or via console.
  2. Enter the                        global configuration mode using the command:
    Router>enable
    Router#conf terminal
    Router(config)#

Step 2 :

Enable the router's HTTP/HTTPS server, using the                      following Cisco IOS commands: 

Router(config)# ip http server

Router(config)# ip http secure-server

Router(config)# ip http authentication local


Note:- HTTPS is enabled only for crypto enabled IOS images.

Step 3:

Create a user with privilege level 15.

Router(config)# username <username> privilege 15                      password 0 <password>

Note:- Replace <username> and <password> with the username                      and password that you want to configure.

Step 4:

Configure SSH and Telnet for local login and privilege                      level 15:

Router(config)# line vty 0 4

Router(config-line)# privilege level 15

Router(config-line)# login local

Router(config-line)# transport input telnet

Router(config-line)# transport input telnet ssh

Router(config-line)# exit


Step 5: (Optional) Enable local logging to                      support the log monitoring function: 

Router(config)# logging buffered 51200 warning

Agora vem minha duvida:

No Roteador interface f0/0: 192.168.1.5 255.255.255.0

No Pc: 192.168.1.1 255.255.255.0 192.168.1.5

Seria assim a configuração de ambos..

Aguardo alguma solução.

Lucas.

7 RESPOSTAS

Re:Configuração SDM

Lucas

Posta o show version e o show flash. E tenta rodar RSA Key com o comando
Crypto key generate rsa general-key


De contra partida seria legal vc tentar usar o Cisco Configuration Professional ele é mais atual que o SDM.

Sent from Cisco Technical Support Android App

Cheers Bruno Rangel Please remember to rate helpful responses using the stars bellow and identify helpful or correct answers .
New Member

Re:Configuração SDM

Router>show version
Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(19a),
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Mon 09-Jun-08 06:44 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Router uptime is 56 minutes
System returned to ROM by reload at 22:42:09 UTC Tue Sep 3 2013
System image file is "flash:c1841.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 1841 (revision 7.0) with 233472K/28672K bytes of memory.
Processor board ID FTX144502MX
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x3922

Router>show flash:

-#- --length-- -----date/time------ path

1     23436376 Feb 22 1907 17:31:44 +00:00 c1841.bin

40574976 bytes available (23437312 bytes used)

New Member

Re:Configuração SDM

Qual configuração para o CCP.

Re:Configuração SDM

Ola Lucas

O comando Crypto key generate rsa general-key funcionou?

Sobre o CCP voce pode encontrar nO Getting Started with Cisco Configuration Professional

Cheers
Bruno Rangel

Please remember to rate helpful  responses using the stars bellow and identify helpful or correct answers .

Cheers Bruno Rangel Please remember to rate helpful responses using the stars bellow and identify helpful or correct answers .
New Member

Re:Configuração SDM

Não funcionou esse comando.

Instalei o CCP, mais tem um problema quando ele abre a tela do CCP fica só na parte superior do Internet Explorer:

Alguma solução.

New Member

Configuração SDM

Re:Configuração SDM

O que exatamente não funcionou ? O comando foi aplicado ou vc recebeu algum tipo de erro? Se possível posta o show run do seu Roteador.

Sobre CCP tenta utilizar outro browser

veja tambem essas discussoes, tem bastante informacao relevantes:

How to install Cisco Configuration Professional?

Cisco Configuration Professional with Windows 7

Configuration Professional (CP) with Windows 7 64bits and Internet Explorer (IE) 9


Sent from Cisco Technical Support Android App

Cheers Bruno Rangel Please remember to rate helpful responses using the stars bellow and identify helpful or correct answers .
344
Apresentações
0
Útil
7
Respostas
CriarFaça o para criar o conteúdo