cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
Comunicados
Bem-vindo à Comunidade de Suporte da Cisco, gostaríamos de ter seus comentários.
New Member

Problema Router 1905

Estou com um problema grave, meu router (Router Cisco 1905) quando inicia trava e depois de 5min rebuta, não sei mais o que fazer, alguém pode me ajudar, segue abaixo erro.

 

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.09.25 10:12:43 =~=~=~=~=~=~=~=~=~=~=~=

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Installed image archive
Cisco CISCO1905BR-SEC/K9 (revision 1.0) with 229376K/32768K bytes of memory.
Processor board ID TSP1815ACCP
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

 

%Software-forced reload


 10:11:05 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D33F7C

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2399DB90z 0x2399DCC8z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399EF78z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A945F10, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEF11C, t1 : 00000000 50009FE1, t2 : 00000000 21019C18, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21019C18, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B5848, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E1B00, sp : 00000000 294EC528, s8 : 00000000 294EC590, ra : 00000000 21D322AC
EPC  : 21D33F7C, ErrorEPC : 80412BC4, SREG     : 50009FE3
MDLO : 00000E01, MDHI     : 00002000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00002710
TagLo_Icache : 0x00000000 - 21009B83, DataLo_Icache : 0xAE600000 - 12800004
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 287DDD03, TagHi_Dcache : 0x00000000 - 087D9D01
DataLo_Dcache: 0x0000000A - 21DF69FC, DataHi_Dcache : 0x00000000 - 00000004
TEXT_START : 0x210077D8
DATA_START : 0x256AAF00
Cause 00000024 (Code 0x9): Breakpoint exception


 10:11:05 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D33F7C

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2399DB90z 0x2399DCC8z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399EF78z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A945F10, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEF11C, t1 : 00000000 50009FE1, t2 : 00000000 21019C18, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21019C18, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B5848, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E1B00, sp : 00000000 294EC528, s8 : 00000000 294EC590, ra : 00000000 21D322AC
EPC  : 21D33F7C, ErrorEPC : 80412BC4, SREG     : 50009FE3
MDLO : 00000E01, MDHI     : 00002000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00002710
TagLo_Icache : 0x00000000 - 21009B83, DataLo_Icache : 0xAE600000 - 12800004
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 287DDD03, TagHi_Dcache : 0x00000000 - 087D9D01
DataLo_Dcache: 0x0000000A - 21DF69FC, DataHi_Dcache : 0x00000000 - 00000004
TEXT_START : 0x210077D8
DATA_START : 0x256AAF00
Cause 00000024 (Code 0x9): Breakpoint exception
File usbflash0:crashinfo_20140925-101105-BRT open failed (-1): No more root directory entries available


 10:11:05 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D33F7C

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2399DB90z 0x2399DCC8z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399EF78z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A945F10, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEF11C, t1 : 00000000 50009FE1, t2 : 00000000 21019C18, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21019C18, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B5848, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E1B00, sp : 00000000 294EC528, s8 : 00000000 294EC590, ra : 00000000 21D322AC
EPC  : 21D33F7C, ErrorEPC : 80412BC4, SREG     : 50009FE3
MDLO : 00000E01, MDHI     : 00002000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00002710
TagLo_Icache : 0x00000000 - 21009B83, DataLo_Icache : 0xAE600000 - 12800004
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 287DDD03, TagHi_Dcache : 0x00000000 - 087D9D01
DataLo_Dcache: 0x0000000A - 21DF69FC, DataHi_Dcache : 0x00000000 - 00000004
TEXT_START : 0x210077D8
DATA_START : 0x256AAF00
Cause 00000024 (Code 0x9): Breakpoint exception

-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2399DB90z 0x2399DCC8z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399DC20z 0x2399DD6Cz 0x2399EF78z 0x239ABEA8z 0x239B01DCz 
File usbflash0:crashinfo_20140925-101105-BRT open failed (-1): No more root directory entries available
File usbflash0:crashinfo_20140925-101133-BRT open failed (-1): No more root directory entries available


=== Flushing messages (10:11:43 BRT Thu Sep 25 2014) ===

Buffered messages:
Queued messages:
*Sep 25 13:11:43.179: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Jan  2 00:00:03.595: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan  2 00:00:03.787: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = securityk9 and License = securityk9
*Jan  2 00:00:04.063: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = datak9 and License = datak9
*Sep 25 13:10:40.739: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0
*Sep 25 13:10:55.791: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized 
*Sep 25 13:10:55.795: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled 
*Sep 25 13:10:56.879: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Sep 25 13:10:56.879: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Sep 25 13:10:57.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Sep 25 13:10:57.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Sep 25 13:11:01.983: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
*Sep 25 13:11:04.375: %SYS-6-CLOCKUPDATE: System clock has been updated from 13:11:04 UTC Thu Sep 25 2014 to 10:11:04 BRT Thu Sep 25 2014, configured from console by console.
*Sep 25 13:11:05.083: %SYS-2-MALLOCFAIL: Memory allocation of 135188 bytes failed from 0x239B5848, alignment 0 
Pool: Processor  Free: 87196  Cause: Not enough free memory 
Alternate Pool: None  Free: 0  Cause: No Alternate pool 
 -Process= "Init", ipl= 0, pid= 3
-Traceback= 23B39078z 2568AB84z 239AE950z 239AEAE0z 2399DB90z 2399DCC8z 2399DD6Cz 2399DC20z 2399DD6Cz 2399DC20z 2399DD6Cz 2399EF78z 239ABEA8z 239B01DCz 2398A11Cz 239D1740z
*Sep 25 13:11:12.167: %IP-4-DUPADDR: Duplicate address 192.168.111.1 on GigabitEthernet0/1, sourced by 0026.5ac9.d371
*Sep 25 13:11:12.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up
*Sep 25 13:11:12.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
*Sep 25 13:11:12.171: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*Sep 25 13:11:13.179: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down

No warm reboot Storage 

*** System received a Software forced crash ***

signal= 0x17, code= 0x24, context= 0x28d3b53c

  PC = 0x21d33f7c, SP = 0x294ec528, RA = 0x21d322ac

  Cause Reg = 0x00000024, Status Reg = 0x50009fe3


System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.


Total memory size = 256 MB

CISCO1905BR-SEC/K9 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with ECC disabled

 

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0

program load complete, entry point: 0x80903000, size: 0x4c4a0

 

IOS Image Load Test 

___________________ 

Digitally Signed Release Software 

program load complete, entry point: 0x81000000, size: 0x41c1bd8

Self decompressing the image : #################################################################################################################################################################################################################################################################################################################################################################################################### [OK]


Smart Init is enabled

smart init is sizing iomem

                 TYPE      MEMORY_REQ

    Onboard devices &

         buffer pools      0x01E8F000 

-----------------------------------------------

               TOTAL:      0x01E8F000


Rounded IOMEM up to: 32Mb.

Using 12 percent iomem. [32Mb/256Mb]


              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

 

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M6a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 15-Apr-14 03:31 by prod_rel_team


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Installed image archive
Cisco CISCO1905BR-SEC/K9 (revision 1.0) with 229376K/32768K bytes of memory.
Processor board ID TSP1815ACCP
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

 

%Software-forced reload


 10:17:59 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D328FC

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2398F2F8z 0x2399035Cz 0x23990640z 0x2398D904z 0x2398DA20z 0x2398E044z 0x2398BE28z 0x2399EFA4z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A92E410, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEDA9C, t1 : 00000000 50009FE1, t2 : 00000000 21018598, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21018598, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B41C8, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E0480, sp : 00000000 294D4B58, s8 : 00000000 294D4BC0, ra : 00000000 21D30C2C
EPC  : 21D328FC, ErrorEPC : 80412BEC, SREG     : 50009FE3
MDLO : 00000E02, MDHI     : 00000000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00001190
TagLo_Icache : 0x00000000 - 2101FB83, DataLo_Icache : 0x8E34003C - 8C430000
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 28152A83, TagHi_Dcache : 0x00000000 - 087D8681
DataLo_Dcache: 0x00000001 - 212D92D0, DataHi_Dcache : 0x00000000 - 00000013
TEXT_START : 0x21006158
DATA_START : 0x256A9880
Cause 00000024 (Code 0x9): Breakpoint exception


 10:17:59 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D328FC

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2398F2F8z 0x2399035Cz 0x23990640z 0x2398D904z 0x2398DA20z 0x2398E044z 0x2398BE28z 0x2399EFA4z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A92E410, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEDA9C, t1 : 00000000 50009FE1, t2 : 00000000 21018598, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21018598, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B41C8, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E0480, sp : 00000000 294D4B58, s8 : 00000000 294D4BC0, ra : 00000000 21D30C2C
EPC  : 21D328FC, ErrorEPC : 80412BEC, SREG     : 50009FE3
MDLO : 00000E02, MDHI     : 00000000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00001190
TagLo_Icache : 0x00000000 - 2101FB83, DataLo_Icache : 0x8E34003C - 8C430000
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 28152A83, TagHi_Dcache : 0x00000000 - 087D8681
DataLo_Dcache: 0x00000001 - 212D92D0, DataHi_Dcache : 0x00000000 - 00000013
TEXT_START : 0x21006158
DATA_START : 0x256A9880
Cause 00000024 (Code 0x9): Breakpoint exception
File usbflash0:crashinfo_20140925-101759-BRT open failed (-1): No more root directory entries available


 10:17:59 BRT Thu Sep 25 2014: Breakpoint exception, CPU signal 23, PC = 0x21D328FC

 

--------------------------------------------------------------------
   Possible software fault. Upon reccurence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2398F2F8z 0x2399035Cz 0x23990640z 0x2398D904z 0x2398DA20z 0x2398E044z 0x2398BE28z 0x2399EFA4z 0x239ABEA8z 0x239B01DCz 
$0 : 00000000 00000000, AT : 00000000 287E0000, v0 : 00000000 00000000, v1 : 00000000 00000000
a0 : 00000000 2A92E410, a1 : 00000000 00000001, a2 : 00000000 00000000, a3 : 00000000 00000000
t0 : 00000000 21DEDA9C, t1 : 00000000 50009FE1, t2 : 00000000 21018598, t3 : FFFFFFFF FFFF00FF
t4 : 00000000 21018598, t5 : 00000000 00000000, t6 : FFFFFFFF 80011800, t7 : 00000000 00000C28
s0 : 00000000 00000000, s1 : 00000000 27FE0000, s2 : 00000000 00021014, s3 : 00000000 00021014
s4 : 00000000 239B41C8, s5 : 00000000 00000000, s6 : 00000000 00000000, s7 : 00000000 00000000
t8 : 00000000 00000C40, t9 : 00000000 00800118, k0 : 00000000 504080E1, k1 : FFFFFFFF FFFFFFFE
gp : 00000000 287E0480, sp : 00000000 294D4B58, s8 : 00000000 294D4BC0, ra : 00000000 21D30C2C
EPC  : 21D328FC, ErrorEPC : 80412BEC, SREG     : 50009FE3
MDLO : 00000E02, MDHI     : 00000000, BadVaddr : 00000000
CacheErr_Icache : 0x007F7F00 - 00001EF8, CacheErr_Dcache : 0x00000000 - 00001190
TagLo_Icache : 0x00000000 - 2101FB83, DataLo_Icache : 0x8E34003C - 8C430000
DataHi_Icache: 0x00000000 - 00000001
TagLo_Dcache : 0x00000000 - 28152A83, TagHi_Dcache : 0x00000000 - 087D8681
DataLo_Dcache: 0x00000001 - 212D92D0, DataHi_Dcache : 0x00000000 - 00000013
TEXT_START : 0x21006158
DATA_START : 0x256A9880
Cause 00000024 (Code 0x9): Breakpoint exception

-Traceback= 0x21D2D07Cz 0x21D2B3ACz 0x23B39078z 0x2568AB84z 0x239AE950z 0x239AEAE0z 0x2398F2F8z 0x2399035Cz 0x23990640z 0x2398D904z 0x2398DA20z 0x2398E044z 0x2398BE28z 0x2399EFA4z 0x239ABEA8z 0x239B01DCz 
File usbflash0:crashinfo_20140925-101759-BRT open failed (-1): No more root directory entries available
File usbflash0:crashinfo_20140925-101827-BRT open failed (-1): No more root directory entries available

 

2 RESPOSTAS

Bom dia Amigo, Veja se as

Bom dia Amigo,

 

Veja se as informações deste link podem te ajudar. Isso que voce relatou é um bug de alocação de memória. Mas pode ter outras causas raiz, como quantidade de memoria insuficiente, etc.

http://www.cisco.com/c/en/us/support/docs/routers/7500-series-routers/26145-crashes-swforced-troubleshoot.html

 

Attn

Daniel

Daniel Sobrinho
Cisco Employee

ale.moscarella, bom dia! A

ale.moscarella, bom dia!

 

A melhor maneira de resolver um problema de crash em seu roteador seria abrindo um caso com o TAC para que este crash seja analisado e identificado se é um problema de HW ou SW. 

Além disto, uma outra opção seria fazer o upgrade do IOS para última versão e verificar se o problema ainda persiste ou não.

 

Atenciosamente,

Thiago Lopes

310
Apresentações
10
Útil
2
Respostas
CriarFaça o para criar o conteúdo