cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
Avisos
¡Bienvenido a la nueva Comunidad de Soporte de Cisco! Nos encantaría conocer su opinión
New Member

Configure mls qos map dscp-cos **** on Switch 2960

Hi,

I need to configure mls qos map dscp-cos ******

But not appear mls qos map

Switch(config)#mls qos ?
  rewrite    Rewrite Packet/Frame
  srr-queue  Configure SRR receive queues
  <cr>

Which is the reason?

cisco WS-C2960-24LC-S

c2960-lanlitek9-mz.122-53.SE2.bin


Regards

Guillermo

1 SOLUCIÓN ACEPTADA

Soluciones aceptadas
Cisco Employee

Hi Guillermo,

Hi Guillermo,

   The reason for this behavior is because you are using the Lan lite feature set for your switch. You need LAN Base feature set to support QoS Map Tables. The following indicates this as well as other features not available for your current image:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swqos.html

Regards.

1 RESPUESTA
Cisco Employee

Hi Guillermo,

Hi Guillermo,

   The reason for this behavior is because you are using the Lan lite feature set for your switch. You need LAN Base feature set to support QoS Map Tables. The following indicates this as well as other features not available for your current image:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swqos.html

Regards.

49
Visitas
0
ÚTIL
1
Respuestas
CrearPor favor para crear contenido