06-17-2016 11:58 AM - editado 03-21-2019 05:18 PM
Hi,
I need to configure mls qos map dscp-cos ******
But not appear mls qos map
Switch(config)#mls qos ?
rewrite Rewrite Packet/Frame
srr-queue Configure SRR receive queues
<cr>
Which is the reason?
cisco WS-C2960-24LC-S
c2960-lanlitek9-mz.122-53.SE2.bin
Regards
Guillermo
¡Resuelto! Ir a solución.
el 06-17-2016 12:44 PM
Hi Guillermo,
The reason for this behavior is because you are using the Lan lite feature set for your switch. You need LAN Base feature set to support QoS Map Tables. The following indicates this as well as other features not available for your current image:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swqos.html
Regards.
el 06-17-2016 12:44 PM
Hi Guillermo,
The reason for this behavior is because you are using the Lan lite feature set for your switch. You need LAN Base feature set to support QoS Map Tables. The following indicates this as well as other features not available for your current image:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swqos.html
Regards.
¡Conecte con otros expertos de Cisco y del mundo! Encuentre soluciones a sus problemas técnicos o comerciales, y aprenda compartiendo experiencias.
Queremos que su experiencia sea grata, le compartimos algunos links que le ayudarán a familiarizarse con la Comunidad de Cisco:
Navegue y encuentre contenido personalizado de la comunidad