switch

[#1]

requiero de un switch de 24 puertos ethernet + 4 puertos SFP gbps, capa 3 , snmpv3, sshv2, radius, tacacs+, web browser, telnet, https, snmp, rmon, tftp, ssh, cli, vlans=1023, full duplex. proteccion ip30 min. que soporte ipv4, ipv6, ssh

[hugoaraujobarragan]

Saludos Cristobal:

Te dejo el Switch que necesitas,hechale un vistaso al datasheet.

WS-C3650-24TS

[Julio E. Moisa]

Buenos dias Cristobal,

A continuacion comparto 2 enlaces modelos diferentes, toma en consideracion que si quieres tener Capa 3 al menos se debe contar con la licencia de IP Base o IP Services, este ultimo trae todo los relacionado a layer 3. 

Cisco 3650

http://www.cisco.com/c/en/us/products/switches/catalyst-3650-series-switches/models-comparison.html

Cisco 3850

http://www.cisco.com/c/en/us/products/switches/catalyst-3850-series-switches/models-comparison.html

Por lo que he leido tambien tienes la opcion de hace upgrade de licencia de LAN Base a IP Base, pero no se puede hacer de LAN Base a IP Services a excepcion de algunos casos:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/product_bulletin_c25-720777.html

Table 2.       Cisco IOS Software Feature Set Differences

Functions	LAN Base	IP Base	IP Services
Layer 2+	Enterprise access Layer 2 Wide range of Layer 2 access features for enterprise deployments supports Cisco StackPower technology	Complete Access Layer 2 Supports all Cisco Catalyst 2000 and Cisco Catalyst 3000 Layer 2 features, including hot standby protocols
Layer 3	Static IP routing support Support for SVI	Enterprise access Layer 3 RIP, EIGRP stub, OSPF for routed access, PBR, IPv4 & IPv6 EIGRP stub routing, WCCP, IPV6 uRPF, IPV6 PBR, VRRPv3, Policy Classification Engine, HSRP v6	Complete access Layer 3 OSPF, EIGRP, BGP, IS-IS VRF-lite
Multicast	IGMP	IPV4 & IPV6 PIM routing
Mobility	Supports Cisco Unified Wireless Networking mobility architecture	Supports Cisco Converged Access mobility architecture with CAPWAP termination at the access
Manageability	Basic manageability Support for a wide range of MIBs, IPSLA Responder, and RSPAN, PnP, Autoconf, Interface Templates, Secure CDP	Enterprise access Layer 3, Flexible NetFlow for wired and wireless traffic EEM, GOLD-Lite, and Smart Install Director
Security	Enterprise access security DHCP Snooping, IPSG, DAI, PACLs, Cisco Identity 4.0, NAC and 802.1x features	Complete access security Router and VLAN ACLs, private VLANs, complete identity and security; Cisco TrustSec®SXP and IEEE 802.1AE capable in hardware, Device Sensor
QoS	Enterprise access QoS Ingress policing, Trust Boundary, AutoQoS, and DSCP mapping	Complete access QoS Support for all Cisco Catalyst 2000 and Cisco Catalyst 3000 QoS features, including per-VLAN policies
Interoperability	Prime 2.1	Identity Services Engine (ISE 1.2/1.3), Mobility Services Engine (MSE 8.0), Improved WebUI

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html

Espero esto sea util

:-)