Routing

Hi,we have 3 connections from ASA to AWS instances with strongswan installed. One of the connections is down, other two work without problem, it was working several weeks. Only thing which changed was network object in connection profile (but with th...

Hi all, I need help regarding Netflow implementation - I have an ASR1002 already configured with Netflows, and I need insight on the following. Let's say if I were to implement 1 Netflow connection, or even 2, to different destinations, would you hap...

What is the purpose of the NHS command on the spoke nodes in the DMVPN topology? SPOKE-02(config-if)#ip nhrp nhs ?   A.B.C.D   Protocol IP address of NHS   cluster   NHS Redundancy cluster configurations   dynamic   NHS protocol address dynamically ...

Hi Experts, I need support on designing and configuring QoS for a campus network which consists of 3 layers: Access Layer (Cisco 3850)Distribution Layer (Cisco 6800)Core Layer (Cisco ASR920) Attached is the network topology for the campus. we have Ci...

I am setting up a Cisco 1811 router to manage multiple VLANS on my network. On the back of the router I have 10 FastEthernet ports. From what I understand, FE0 and FE1 are considered WAN ports, and FE2-FE9 are LAN ports. I am confused though, becau...

Hi to all! I have a Cisco router C887 which is having many discards on the output queue. It is having 1 megabit upload speed ADSL line(ATM interface). The discards occur at 15-40% utilization of the line. #sh int atm 0ATM0 is up, line protocol is u...

Dears, I have ASR 903 router whose memory utilization reaches to 50% and the show process  cpu  is only 14%. I want to know where the memory is been utilized for, and is it whether this is normal for ASR router's??? I have just uploaded the suggested...

Hello! I have a problem with configuratons QoS for 1811 and 2811 routers. Not all packets are matched by service-policy. Config from 1811: class-map match-all Conference match access-group 120 policy-map Conference class Conference  priority 8000 cla...

Hi, How do i verify that  if 5 GHz cells are designed with a -67 dBm overlap Thanks

Hi, The router crashes due to below error - System returned to ROM by bus error at PC 0x25496778, address 0x26C Router crashes only once and now its working fine. It must have been the software error due to which is happened. No hardware failure or ...

Hi, I am testing a redundant DMVPN solution with spokes that have dual internet connections but also require clients behind each spoke to be able to route directly to the internet to reach any destinations not reachable via the DMVPN hubs i.e. split ...