What's the best method of adjusting Metric forwarding?
What's the best method of adjusting Metric forwarding?
Hi all,Does Cisco Switch 3850 and 2960X Switches support Radius MS-CHAP-V2? If Yes, can i get it configure on both switches and windows server 2012 r2? hope someone can provide an advise on this. Many thanks,Ringo Ngoh
Please teach throughput of Cisco ISR G2 routers (i.e. Cisco 19xx, 29xx, 39xx) with configuring Traffic Shaping. Below URL doesn't explain with only Traffic Shaping configuration situation.https://supportforums.cisco.com/sites/default/files/legacy/5/9...
hi.i copied a wrong IOS image to WS-C3750X-24T-S switch so the switch does not boot.i booted from recovery mode.but when i want to copy a file using xmodem , or when i want to see contents of flash it gives me the following errors:(the pictures are a...
Hi all, I am trying to create an IPsec VPN tunnel from a Cisco ASA 5512 to a Cisco 881. The local network of the ASA is 192.168.115.0/24The WAN of the ASA is 220.244.7.134 The remote network of the Cisco 881 is 192.168.118.0/24The WAN of the Cisco is...
Hi, I have a new Cisco ASA 5505 that I can't get internet access on. I set it up using the Startup Wizard. I have my outside interface an address of 69.3.19.242, the T1 provider gave me a router that they have setup with an address of 69.3.19.241, bu...
Hello,Like in subject, i try to get this working without success.....Router(config)#vpdn-group 1Router(config-vpdn)#request-dialinRouter(config-vpdn-req-in)#protocol pppoe ^% Invalid input detected at '^' marker.......
Hi All,I have noticed that i have a communication between both sites when i had configured the default gateway in the PC's which are not in the same segment as their IP address is.As far as i know, whenever the destined traffic is in different networ...
Assuming I did everything else right...what might I be missing? R2 and R3 have been configured with physical IPv4 addresses/Loopbacks and each also has an IPv6 Loopback simulating an internal network.I even configured the Tunnels on each Router with ...
Gentlemen,We have configured priority for Voice/Video as 35% bandwidth guarantee out of 100 % and in fact that was the main reason we put our delay-sensitive traffic on a guarantee queue so that no other traffic supersede VOIP. (Below is the full QOS...
I have a Cisco C891F-K9 router up and running for about 8 months with the new settings, but after a reload, it "hangs" without an error.Anybody an idea how to fix this?Below is the output I receive when booting the router.Kind regards, Erwin*********...
Hi All, today I came across a behaviour of the route-map option in the OSPF default-information originate command I don't understand.I have this pretty simple setup:R1 Loop0: 1.1.1.1/32R1 Loop10: 10.10.10.10/32R1 Fa0/0: 192.168.12.1/24 R2 Loop0: 2....
Good Morning,First post, but i'm getting a bit confused on a relatively simple issue (I think)..I have a requirement for a static NAT to access a camera on an internal subnet at a remote site (subnet is not routed to our head office). I am at head of...
We have 2 sites (A and B) that each have their own MPLS connection through BGP. These are redistributed to OSPF, which then connects to the core switch at each respective site. We have recently installed a wireless bridge connecting site A and B that...
Hello........ Still on the issue of ASR. It was configured and integrated on the production network.i have a problem of limiting bandwidth for customers.Need help for configuring a dedicated bandwidth for customers.Example : configuring a dedicated ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 09:18 AM | ||
04-26-2024 07:58 AM | ||
04-24-2024 03:30 PM | ||
04-24-2024 03:57 AM | ||
04-23-2024 05:38 PM |
User | Count |
---|---|
11 | |
9 | |
5 | |
2 | |
2 |