Routing

Hi Guys,I am trying to match traffic from pingdom.com from probing some web servers. So I have: Class Map match-all unwanted (id 1)   Match protocol http c-header-field "Pingdom.com_bot_version_1.4_(http://www.pingdom.com/)\r\n" Class Map match-any c...

Hello all. When redistributing BGP routes learned from an IBGP confederation peer into OSPF, do I need to enter the bgp redistribute-internal command under the BGP process in order to ensure that BGP allows the routes to get redistributed? or does BG...

Hi, we're recently renumbered a number of our backbone links from /30 to /31.  Shortly after doing so, we noticed that a number of our MPLS-TE tunnels had gone down within portions of the network that were renumbered and I'm wondering whether or not ...

I am getting this error on logs at Cisco 1900 series router used for Internet connection. Please can any body help why its happening. 

Hi Friends, I am facing an issue with DHCP. I have configured dhcp on my distribution switch.(4507), for Access Points.I have configured the interface as below;interface fa5/35  description to AP  switchport mode trunk  switchport trunk native vlan 7...

 My 3845 router went in to rommon mode today morning. I tried four different IOSes and still when booting it says "system received a software forced crash"  and some checksum mismatch. what could be the reason? Please help. I am really stuck here

hiour network consists of two routers , the first is cisco 6506-E , the second is cyberoam750 UTMc6506=132.1.99.1cyberoam = 132.1.1.214all clients connected as seen in the pic below . and all clients have 132.1.99.1 as the default gatewayI want to fo...

Hi All, 45 minutes of searching documents and google, and I cannot find a series of commands that will help me identify the Source IP of the router which advertised a route.  The router I am accessing is the on-premise router, and only has one neighb...

Hi, I'm trying to do some lab testing and tested named EIGRP. I was able to understand the EIGRPv6 configuration where you configure the EIGRP statement under the interface and by issuing "no shutdown" under the EIGRP process created. So basically al...

Hi i want to connect a Macbook pro using a rj45 to rj45 console cable to set up a switch but i don't know what to do and no information about it online only about usb. Can anyone help? Thanks    

I have a Cisco 887VA router that has a working VDSL configuration. It syncs with an attainable rate of 48932 kbits/s and 13432 kbits/s. Speed tests max out around 38Mbits and I can get download speeds of 4.5MB/s but the CPU utilisation hits the roof....

I am having a problem I hope someone can help me with. I have a Cisco 2801 router with a 2950 switch. I have the switch configured with 3 VLANs and a trunk established in a router on a stick configuration. The VLANs function perfectly, but I do not h...