Routing

I run a stack of WS-2960X-48TD-L width 15.0(2)EX5. This stack was an exchange for an WS-C4506 with Sup V.Since the Stack ist running instead of the 4500, Ports leading to servers running Windows 2008/2012 go down unintentionally. This happens multipl...

Hi, we have a Cisco 2921 with two Internet connections: The primary connection is a DSL link on an EHWIC-VA-DSL-A, the backup a UMTS/LTE connection  on a EHWIC-4G-LTE-G. In case the DSL link fails, an automated failover to the second (UMTS/LTE) conne...

I am in need of Policy Based Routing for a new project.  At my core I have a couple of Nexus 5548s clustered together.  I go into configure terminal and run the command "feature pbr" and the return is invalid.  So I check the license with the command...

Hello,I have a router with an interface pointed outside. My goal is to put an ACL in place that blocks all SSH traffic except SSH coming from inside the network. Here is what I came up with. I would then apply this to the VTY lines coming IN. Would t...

Hi all.I have problems with BGPSay there 2 routersr1---------r2In r1 I have route 192.168.0.0/24 with AS path (24721 65000 500)r2 have the same route with AS path (24720 24721 65000 500) I want that r1 advertise 192.168.0.0/24 to r2 with its own AS o...

I am running:Cisco IOS XE Software, Version 03.11.01.S - Standard Support ReleaseCisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)using license:License Level: premiumLicense Type: Evalu...

Hi,We have a full fledged CPI 1.3.0.20 running with about 150-200 buildings worth of wireless data. We need to upgrade it to 2.1 version to make use of the 702W APs WPPs. The upgrade is failing in a boot loop again and again no matter what we do. We ...

Dear Techies,One of our customer is currently running the following IOS version;c2900-universalk9-mz.SPA.151-4.M3.bin Please advise me on the following concerns, Q1. Please let me know if we install the “HWIC-2T” rather than "HWIC-1T" module with cur...

Hello there,I configure my trixbox for users who xlite outside our network can connect and make calls for free on internal positions our company.this configuration is also made ​​with a Cisco 2900 router, which redirects ports 5060 and 10,000 to 150,...

Hello all!I'm having an issue with a tunnel between two routers. I have the tunnel up and going, I can ping back and forth across the tunnels. What I can't do is ping local devices on only one end of the tunnel. That router is connected via 4g LTE ce...

If you'll notice, 10.1.10.254 ports are 3390.  However, since I was hired at this company, I have connected over the public IP to that server via 3389.  It makes no sense.I'd like to know how to clear those 3389 and 3390 entries.  Here is what I have...

Hi Experts,After a few weeks of research and frustration, finally installed a working MPLS VPN between 3 sites. Configured 3 CE routers using static route. Default QoS on all location - which means no QoS configured. My question is, just as the title...