Routing

Hi Guys,Im trying to minimise the problems caused when a neighbor flaps.Im trying to use dampening.I have the below config to dampen any route..ip prefix-list NETWORK_FLAPPING seq 5 permit 0.0.0.0/0 le 32route-map NETWORK_DAMPENING permit 10 match ip...

Hi Team,Can you please help me with below query?Can you please give me part code of FE Optical SMF?Will it be compatible with Cisco 1941 CPE?

All,I wanted to get some other thoughts on this. I have a location that has 2 routers peering with ISP using ebgp. The convergence time is okay. I lose about 5 packets before the other router picks up. The concern that I have is that we're moving to ...

I know by doing the, frame-relay map ip <x.x.x.x> (dlci #) broadcast routing protocols work in my lab inside of packet tracer. But when I was just doing inverse arp dynamically, "Serial0/0 (up): ip 80.53.32.1 dlci 25, dynamic, broadcast, CISCO, statu...

HiI have a 887VA in a live environment that needs QOS for VoIP - choppy calls....I'm a novice with QOS, so have been playing with my 861.This is what I'm trying...ip access-list extended VOIPpermit tcp any any range 6000 6049permit tcp any any eq 506...

I have five 1811 routers that will not upgrade to the latest IOS version c181x-adventerprisek9-mz.124-24.T8.binThey all have this weird IOS version "PCBU_WIRELESS_BASE_POINT" installed but none are wireless Wifi or 3/4g (if this is what they are refe...

multilink bundle-name authenticated.... This command as mentioned in the cisco page is not shown in the running configuration.But i find in the running config of my router. Can anyone explain the difference which the authenticated and endpoint keywor...

Hi please guide me .how i can make my internal lap ip address (ex.10.1.x.x) acessiable to spoke location ip address range 10.240.x.x in hub spoke network topology . since 10.1.x.x is hub location lan address. currently i'm able to ping from spoke rou...

Hi,    I have a router CISCO 3945 with IP Base licence. I would like run BGP in this Router, please could you suggest suitable licence to Support BGP in CISCO 3945 Router.  Thanks & RegardsVenkat

 Hello everyone,I have a lab router on which I am working on ( 876 ) and I have succefully configured wan failover for the 2 wan interfaces. Now the failover part works great and traffic is routed correctly. Also the port forward works but only for t...

Dear Sir,I have leased line connection with 6 usable public ip addresses and  my connection through BSNL FTTH and modem is AONT-100C. I have connected to router (Cisco 861 ) fe4 (wan Interface). The router has 4 FE ports under Vlan1. I would like to ...

How to configure VPLS on ASR 1004 device.Which version ASR support this functionality.Please provide configuration doc (VPLS ASR)