Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 

Routing

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Start a conversation

Resolved! Advertise Routes when destination unreachable

Guys, need your help again as always.What i want to achieve is track a destination, if that destination is unreacable then bring that static route into routing table.i know Track can take our route from routing table if destination is unreachable, i ...

ahmad82pkn by • Level 2
  • 1761 Views
  • 10 replies
  • 0 Helpful votes

Cisco 2600 router multicast

Good Morning,I need to perform the following task scenario:I have a Cisco 2600 series with 2 X FastEthernet ports and I would like to configure the cisco to perform the task if it is possible..The scenario is:2 networks:F0/0: 192.168.x.xF0/1: 10.1.x....

desroches by • Level 1
  • 499 Views
  • 1 replies
  • 0 Helpful votes

Issue with 887 routers?

Hi,Does anyone know if 887 routers running Version 12.4 software are not compatible with ADSL2+? One of our customers having been having issue with 887's running Version 12.4 and on ADSL2+.Their ISP is BT and we spoke to them regarding the issue and ...

TXload is 255/255 with simple ping Traffic

I have Multilink setup with 2 combined T1 circuits, one at Site A and one at Site B.When I perform a simple ping from site A to site B the ping is fine and the TXload and RXload are normal.When I perform a simple ping from Site B to site A the TXload...

Resolved! VPN traffic control

Our company has a full tunnel VPN setup with some vendors and they have been doing big transfers which saturate one of our pipes. We have 2 ISPs connects to 2 cisco ASRs. Currently all the traffic are flowing through pipe A only. Is there anyway that...

Leon by • Level 1
  • 894 Views
  • 3 replies
  • 0 Helpful votes

L2TP IP TOS Reflect

Hi.Anyone tried "ip tos reflect" at LNS 7206?Seems not working....vpdn-group 1 accept-dialin   protocol l2tp   virtual-template 1 terminate-from hostname althea local name bertha l2tp ip tos reflect Any suggestions?

ar by • Level 1
  • 708 Views
  • 0 replies
  • 0 Helpful votes

ASR1006 ISSU upgrade fail‏

Hi Guys,ASR1006 dual RP/Dual ESP - Followed this guide: http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/issu.html (Using ISSU to Perform a Consolidated Package Upgrade in a Dual Route Processor Configuration)Current XE ver...

stp compatibility

Hi all, I have a problem with the configuration of a LAN spanning tree in which I have distributed two different brands of electronics. there are a core of Enterasys S8 as a distrubution Enterasys B5124-48, while for access have distributed a number ...

antmurcia by • Level 1
  • 744 Views
  • 1 replies
  • 0 Helpful votes

Resolved! DS3 Connection Issues

We've got a DS3 coming into the HQ which is split into 14 T1's.  6 are Internet, 6 are MPLS and 2 are PRI lines.In the last few days we've had a few outages that our carrie can't explain.  The MPLS lines all dropped for about 10 minutes, then came ba...

NAT based on XFF value in IP header

Hi Cisco Family,       Hope you all are donig good.Can any one please help me to NAT traffic to internet based on XFF value (IP address) in IP header in ASA 5520. IF not possible in ASA, can this be done in any cisco Routers? how?.Thanks and RegardsS...

HWIC for 2801

Hi All,Just want to ask if 4-port serial HWIC-4T is compatible and can be used for the Cisco 2801?thank you and hoping for your help

ospf out going routes

guys how can we contorl out going routes in ospf.............for example router A (WAN)is conected to the client now i can advertise the network by network command but at the back of A router there are 100 of routes which will populate in customer ro...

View All
Review Cisco Networking products for a $25 gift card