Routing

Has anyone seen something similar because I am puzzled as to best course of action. 6509 with 2 x SUP720. Slot 5 SUP reports temp problem and shuts down, but takes the entire switch with it (PSU's go OUTPU FAIL). Second Sup works fine with first remo...

i am currently connecting a callmanager to a local firewall <192.168.1.x> to a cisco 2801 (eth0/0 at 69.x.x.x) to a t1 (s0/3/0) with two sub interfaces 500.1 (isp private for sip) and 500.2 (isp connection to public internet)  My problem is that eth0...

Dear all,A client recently bought a GSR12000 with a SPA-5X1GE with several SFP-GE-S.The client has only Fiber distribution panels with SM fiber. I read that the SPA-5X1GE only use SFP-GE-L  but I installed a GLC-LH-SM and seems to be working OK.I nee...

i am configuring my Cisco 1841 following this guide:http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtmlThe ruoter opens the tunnel and my clients see LOCAL IP ROUTER. All my LAN components  can't see a...

Hi all,i want to configure 6509 dual supervisor (per  box) for VSS , also 6509 has ACE module for server load balancing and FWSM for security. anybody has configured vss with two sup per box. if yes , let me know the procedure to configure it. i coul...

I have 3 Cisco 800 series rounters.Lately the SDM configuration tool hangs when configuring the routers.Can someone tell me how to update the firmware so they are current and work? Here is the router software information… Springland#show versionCisco...

Hi,Router A and Router B(3845) connected with 50 mbps point to point ethernet link.Router A(interface)  shows the bandwidth 49 mbps but routerB shows only 25 mbps.what would be the problem ?Thanks.,

Hi,I've multilink configured which consiste of two T1s+new T1( = three T1s). this new T1 has been causing issue. site was working normal but since new T1 was taking errors we submitted this ckt to telco for testing. site literally got an outage after...

Hi,Is there any best practice or benefit of configuring scheduler interval 500 on ASR 1000.Thanks,Inder

Running several 2800 series H323 gateways that have DMVPN IPSEC tunnels back to corporate office.  The event logs show phones unregistering and going into fallback but doesnt show any tunnel INT down.  Monitoring tools (whats up gold) shows the sites...