Routing

I want to NAT traffic to only destinations that are recieved as BGP routes (Any BGP routes will do, not just a particular neighbour).RTR1 has 3 connections, LAN1 (10.3.0.1/24) and 2 WAN connections with BGP peering on WAN1 connection for some specifi...

My ISP only offers DHCP for connecting, but I want to point to OpenDNS's servers. Setting WAN to DHCP (which I have to do) doesn't allow me to point to OpenDNS. The static DNS settings on the LAN tab don't seem to do anything. My RVL200 allowed th...

I've got a series of simple questions.KNOWN: Bought a Cisco Linksys RV016 Router from a Diocese sale and it runs smoothlyFirmware Version: 1.3.2UKNOWN: How to get the following:Firmware 1.3.4 to updateFirmware 2.0.0 firmware with the bootloader proce...

HelloI'm trying to understand frame relay broadcast queue. Cisco's defaults for a serial interface are:size: 64 packetsbyte-rate: 256000 bytes per secondpacket-rate: 36 packets per second Now if I take the byte-rate / packet-rate I should get the ave...

Hello Friends,I have a Cisco 7206VXR (NPE-G2) router which runs  IOS Version 12.4(15)T13, RELEASE SOFTWARE (fc3).The problem is at times it has stuck static routes in it which wont go away even when the link is down. So the backup wont come up and th...

Hey Guys,My remote router has a BGP neighbor relation with the Loopback IP on my primary router. My backup router also has same loopback IP,but the loopback interface is shutdown. So if my primary goes down, my backup router will not form BGP relatio...

Hello.I have two PRI interfaces against a siemens platform. The gateway is configured with MGCP signaling, when i try to transfer from  PSTN - Siemens to Cisco,  i lose the call but when i transfer from Cisco to Siemens it  works.Communication Manage...

Hi,We are building a Multiple DMVPN Clouds. These are 2 single hub DMVPN clouds and 1 dual hub DMVPN cloud. The dual hub VPN cloud is in a seperate VRF as the other 2 singles.For both single- and the dual- hub DMVPN cloud we use EIGRP as our routing ...

Can anyone help me about "IP Source Routing" and should it be disabled or enable on the router? Thanks in advance.Alfred

Hi:On a Cisco 1841 router I  have an Interface vlan configured. Also I have  f0/0/1 interface  defined as switchport access with the same vlan. Is it possible to now define a tunnel interface and have it include the following  - backup interface vlan...

I've inherited the support of two internet-facing 7206VXR routers used as the BGP tier / Internet ingress-egress point of my organisation. We have three ISP services split between two data centres and an iBGP peering between the two 7206s. Each ISP h...