Resolved! BGP to EIGRP Redistribution Query....
Dear All,I have a doubt in BGP to EIGRP redistribution. My Topology is as Below |--------------------------> A Router -------------------------------------------| | ...
Dear All,I have a doubt in BGP to EIGRP redistribution. My Topology is as Below |--------------------------> A Router -------------------------------------------| | ...
I have read several of the OER docs - reading more as we speak - and they have said the BR should be an iBGP peer with the Master and MUST have an eBGP neighbor on a directly-connected interface. Does anyone know if this is actually implemented that...
Hi ,Pardon me if this is the wrong location to place my question,I need to suggest a CCNP lab for one of teh IT college that covers the whole 4 exams ?Appreciate your kind support , any suggestions ? Thanks
Hi all..I just want to know which routing prorocol is more cpu intensive.In one of my scenario i have to configure BGP or OSPF.Thanx....
Hello House, Awz the Networks at ur side of th world? Pals, I have a slight challenge on my network on of my Border Routers for INternet Traffic. The Fast Ethernet Always 'Freeze' technically. (The Status and Protocol is always UP-UP), but I can not ...
Hi all,i have following situation,1.I have two different ISP and Two different public ip which are connected to Cisco 1841 router with Serial Intreface.2.I have One cisco ASA 5510 which are connected to Cisco 1841 router.3.I am looking Loadbalacing s...
Here is the situation: We have a site with a small router (881), with a port forward setup for an application on a server which resides on the inside of the network. When they are outside of the network they access it using the external IP address...
Is there a way to perform a ping sweep of an entire subnet on a router without using a third party utilitiy?Thanks in advance.
I was running 4.1.5c in my WAAS environment. I have a 612 as CM, several 512 for remote site WAEs and a 574 at a remote site. Last night I updated my CM to 4.1.7 and reloaded. Management to the CM was reestablished and was able to pull info. and ...
Does anyone know the distance limitations for the HWIC-4SHDSL?I have a customer interested in using the bonding feature to get a data rate of over 8.448Mbps, but the data sheets don't show any details on distance limitations.http://www.cisco.com/en/U...
Hello,I have a 100m WAN link between 2x 3750s both terminating on gig ports, but set to 100m FD.I am seeing traffic be restricted to around 25%, with discards appearing beyond this level. We are using QoS to capture VOIP traffic (cos=5) and everythin...
We can disable TFTP-server and FTP server functionalities on a router. How do you disable TFTP or FTP client functionalities on a router? I can see two possible solutions:1. ACL2. Disable copy tftp or copy ftp commands with AAA authorization.Can ...
Unlike EIGRP, which has key chain rotation feature, OSPF authentication key must be manually configured on each link when we want to expire the key. In addition, we have over 400 p2p links that have OSPF configured. I am just wondering if anyone kn...
Hi,Is there anybody that could indicate me the difference between the bootstrap (RXboot) program (0x2101) and ROMMON (0x2120). My understanding of ROMMON is that this can be used on 2600 series router to change the register settings, look for a valid...
i have a cisco 1812 that i want to program at my colocation and i want to put my servers behind the router with public ip addresses. I tried to do it but my servers have no network connectivity. I also want to make 3 of the switch ports on a private ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-28-2024 05:09 AM | ||
04-26-2024 09:18 AM | ||
04-26-2024 07:58 AM | ||
04-24-2024 03:30 PM | ||
04-24-2024 03:57 AM |
User | Count |
---|---|
11 | |
9 | |
5 | |
2 | |
2 |