Routing

Dear Sirs,I want to connect 2 cisco 1721 router together through E1 network ( LAN 2 LAN ).What is the interface cards which I need to install in the 1721 routers to connect the RJ45 E1 links ( need part #).Thanking you for your help.Regards.muneer@ye...

HiI need a help ASAP on the below setup.... pleaseCan i configure multilink on 2811 router with two internet links(2MB and 1MB) both termniated on 2811 router?RegardsVenkat.

gusy i am very new to HSRP i have read some docos but if somecan kindly explain in simple languagewhat is default prioritywhat does prempt meanssecondly do we have to use track interface.....how does it effect prempt or do we have to use it togatherT...

Is  it possible to have 2 OSPF processes to have DMVPN tunnel running  instead of BGP and OSPF?

Please find attached the topology...Here are some requirements. -          ISP-1 Primary and ISP-2 Secondary will be used for outgoing traffic of 10.10.15.0/24 and 10.10.8-14.0 respectively.-          In case link to ISP-1 Primary goes down, 10.10.15...

Hello folks,One of our customers have two internet connections (one for data and one for VoIP) that we have connected to the two routed interfaces to an ISR 1812W.The goal is to seperate the data and VoIP traffic and send it out of their correct conn...

I don't understand the  concept of the set ip next-hop  recursive under a route map.  Any help will be very appreciated

Hi guys,I have a question about how a packet behave's with GRE tunnel's. If rouer A  send a ping to router B  and the ping goes through the tunnel what will the router do for the ip source and ip destination information, will it change it or encapsul...

hello,I'm sure this has been asked a few times,  but I thought there may be newer options.. I am putting a list of parts and licenses we'll need to build a more redundant internet connection.  Currently we own:1x ASR 1004 (edge)2x ASA 5580-20 (fw)1x ...

Hi ThereI got a cisco 3845 and i am just wondering how much the box can run as bandwidth on the Gig link? I have a 100M WES circuit and it seems if I apply a shapping at 100M the point to point connection is loosing packets (not frequently) but still...

Hi,We need to extend same VLAN over IP network having 6500 series switches running IOS  Version 12.2(18)SXF15a.L2tpV3 commnads which worked  well for 3800 series routers are not supported on 6500 IOS.Following commanfs are working on router  :l2tp-cl...

Hi all,I have 2 subnets, subnet 192.168.0.x and 192.168.2.x, why can I only ping stuff in 192.168.0.x from 192.168.2.x, only ping works, but I do have a any any rule for inside.. btw theres a route on the inside of my router that sends everything to ...

I need to be able to throttle bandwidth for a specific server (the AV server) going out to all clients. We keep running into the issue of users turning on systems that haven't beeen on for a while and our AV server pushing out all the updates for the...

Hey guys,I have a user sitting inline with a cisco phone. When he plugs into the port fas4/0/36 I see his phone on vlan11. When he pluggs in his laptop it comes in on port fas3/0/19 and his mac address are static.sw-van-can-3750-Stack#sh mac address-...