Routing

Hi,We need to extend same VLAN over IP network having 6500 series switches running IOS  Version 12.2(18)SXF15a.L2tpV3 commnads which worked  well for 3800 series routers are not supported on 6500 IOS.Following commanfs are working on router  :l2tp-cl...

Hi all,I have 2 subnets, subnet 192.168.0.x and 192.168.2.x, why can I only ping stuff in 192.168.0.x from 192.168.2.x, only ping works, but I do have a any any rule for inside.. btw theres a route on the inside of my router that sends everything to ...

I need to be able to throttle bandwidth for a specific server (the AV server) going out to all clients. We keep running into the issue of users turning on systems that haven't beeen on for a while and our AV server pushing out all the updates for the...

Hey guys,I have a user sitting inline with a cisco phone. When he plugs into the port fas4/0/36 I see his phone on vlan11. When he pluggs in his laptop it comes in on port fas3/0/19 and his mac address are static.sw-van-can-3750-Stack#sh mac address-...

Hi,We have currently running following WAN setup for our core site.1- All remote sites have 34M cct,  connected to core site over 155M MPLS links using 7200 router at core.2-backup is over ISDN using 3600 router or some sites have 2nd MPLS backup lin...

Hello,does anyone know a easy way to show the currrent PPP authentication protocol that is used ?I just found on how to get it from the debug output.But if there is an existing connection, how can I make the router show the protocol that is currently...

Hi all,My core switch is choking with high CPU frequently.There is no routing protocal configured just Static toutes are configured and one PBR.Request you to help me to resolve this.Please check the attached logs for reference.

I thought I found a solution for this previously, but can't seem to find it again.  If someone knows of a link, please post it.  I'm not sure if IP SLA's would do this.My company has historically used point-to-point connections for our WAN.  Recently...

Hi!We established a test environment for LSDO.Components:Cisco 1712 c1700-advsecurityk9-mz.124-3g.binFreeRADIUS Version 2.0.4Question: Is there a (freeradius) "avpair" to assign the physical interface (bri) to the Dialer-Interface?Everything else loo...

Hi,I'm trying to setup 3640 router with 2 ISP's. I can't have BGP because one ISP is comcast running on simple SMC modem/router/firewall but is it perfectly fine to have "route-map " type balancing. I'd like to have 5 IP addresses to use T1 and the r...