Routing

How can I do 'inbound' load-balancing without using BGP? Currently we are using a Linkproof load-balancer, so the DNS query hits our external dns server and then forwards to the LP so it can suggest which of the 3 ISP links to come back in on. Can I ...

We are looking for a router that support 3 internet connections. All of them are Fastethernet Connections.I am looking at this part number XCISCO28112811 w/ AC PWR;2FE;4HWICs;2PVDMs;1NME;2AIMS;IP BASE;64F/256DWhat does 4HWIC mean? Does it mean slots ...

Hello all good day, i want to ask a question, im using Cisco 3845 router, and i have confiure it with PPPoE, is it possible that a CCTV camera can be configure in t? because we need to broadcast it online if its possible, i dont know what commands to...

Hello there,Can I know whether to get information about the B.T.U per hour for Cat6509 with dual 6000W PS?Thank you

HelloHas anyone had any experience with a Cisco 1841 and a HWIC-2SHDSL?The problem I'm having is very very poor upload speeds on a 1Mbps/1Mbps 4 wire G.SHDSL service maxing out at ~ 10-15KBps egress.  The download speed is fine up to ~ 1Mbps ingress....

Hi Guyswhy we configure either FR OR ppp encapsulation inder the interface?ThanksTHANKS CISCO

HiI am trying to find out why the link is slow. I found the internet link has more output than input. So I went to see the top N traffic. But most of the output are unknown. How can I define the protocals to be monitored?Thanks.

Hi,On ASBR ( EIGRP-OSPF) summarization is configuredin ospf processsummery-address 10.1.0.0 255.255.0.0redistribute eigrp 11 subnetsin eigrp processredistribute ospf 10 metric 2000 0 255 1 1500With this 10.1.0.0 /16 subnet is redistributed in OSPF do...

HiWe are using QoS to mapping and prioritize the traffic with dscp ef. My question is the number of match packets is 6252362, but why only has 4074 packets matched in the Queueing? Just wondering if the router is re-structure the packet? Any ideas?Th...

Hi folks,I really don't know if this is the right section to ask this question as it deals with both generic routing and VPN/firewalling technologies.I've simulated and tested the well-known scenario described in this guide:http://www.cisco.com/en/US...

Hey guys, hopefully you can help out a little as this is kind of a learn-by-doing type thing for me. I have an MPLS with the two sub interfaces, MFR1.1 and and MFR1.2. Obviously one is internet, the other is the private VPN.My goal is to make sure th...

Dear Experts,I am getting too may errors and discards on my gig interface!what might be the possible reasons? How to fix it,Load on the link is low but still problem persistsplease helpThanks,Pramod

Hello,Q. Is there a definitive OSPF adjcency limit you should work to for a router?I ask after seeing a core network with 6509-NEB-A's chassis seeing CPU spikes for long periods (causing network melt down!) due to excessive OSPF algorithm. Adjacencie...