Routing

We have a router 2821 with two adsl connections. Also this router is a VPN server, teleworkers can connect to the local lan through one of adsl connections using Cisco VPN client. Now we want one server uses the second adsl connection to connect to t...

Guys,Lets say I have three inside addresses 10.10.10.1, 10.10.10.2, and 10.10.10.3. All three of these addresses will be translated to an outside address of 5.128.1.1 and I have PAT set up. My destination address will an outside address of 12.1.1.1.W...

Hi All,GigabitEthernet0/1 from FULL to DOWN, Neighbor Down: Dead timer expired.Feb 23 2010 20:11:16.177 gmt: %OSPF-5-ADJCHG: Process 1, Nbr x.x.x.xon GigabitEthernet0/1 from LOADING to FULL, Loading DoneWhy these below error means?I am using Point-to...

dear all,I would like to inform me why I don't have any DNS service through my laptop. It takes IP address, but when I hit URLs, there is no response. What should I look for? Below is the configuration of the router:Current configuration : 4943 bytes...

I saw a config recently with the above ranges.  I assumed it was valid external IP's, but it seems these blocks are not routable on the Internet.What is so special about these blocks?Thanks

HiI have Two ADSL connections, a 512 kbps and 4 MB from TWO DIFFERENT ISP's and I have 1 Cisco 1760 Modular Router with WIC 1 ADSL AND WIC e0.Now what I want to do is to configure my router in such way that I get a combined bandiwth or in other words...

Willing to pay for help on building a VPN with a cisco pix 501 contact me 954.205.5131

Hi,We have a client with 4 sites(SHDSL(878's)) in vrf, and they are having issues with intersite voip.We have applied egress policy maps on WAN Ints(giving 40% priority to voip device IP's), but ingress traffic is causing problems(users downloading c...

Can we use AIM-ATM module retrieved from a Cisco2600 router to Cisco2811 router?

Hey everybody!I have a question that pertains OSPF NSSA external routes.The topology goes as follows:R1 area 0 <--------->area0 R2 area29 <-------->area29 R3Area 29 is configured as nssa.In R3 i have static routes that are being redistributed into os...