Routing

Hi,we are using the cisco 7206 vxr NPG2 router as our core router in this we are getting high CPU utlization i have attached the sh proc cpu and interface utlization but as per the router specfication it as to handle 2 million packets per seconds but...

hello all. Today when I was making some changes to my core router, I accidently fat fingered the copy run start command at the end to save my config. I accidently typed "copy run start5" and now every time I do a copy run start, the router is asking...

Hi,we have a business requirement to connect to a 3rd party company to share critcical and security sensitive database. the information is of very small size (Maximum 1 meg of data per day) though very security sensitive. What can be most secured and...

Morning guys, I have been tasked to get a router (877) configured for our adsl2 connection and wanted to know if i would need a new ios for this?Many Thanks!Dan

Hi,I have set clok on Catalyst 3560 switch with command "clock set". it shows the correct time in show clock command. But after rebooting the switch it shows the original old time and date. how do we save this time and date? I have saved the running...

I've been using the NM-CEM-4TE1 on a 928 mile MPLS silver CAR path for over a year now and have recently discovered there is echo on the PABX stations when using the CEoIP Tie line. I have tuned the dejitter buffers and payload size down as far as I...

Hi! I have a strange problem:I have a connecton between 2 routers; Our router (a C1721) and an ISP (a C1812). The ISP router is at our location, and they use it to establish VPN connections to third party service providers.Currently, we have 2 third ...

Hi I added memory to a 2611 router. When I do show version the router tells me that there is 32Megs of RAM which is incorrect. When I am in the ROMMON mode the router displays that there is 64Megs of RAM which is the correct amount. So my question is...

I have a C3600 that has no config on it. When I power it up I getC3600 processor with 65536 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabledloadprog: bad file magic number: 0x0boot: cannot load "flash:"System B...

Hello, i have a 6513 switch with a SUP720 supervisor module running v6.2.18 SXF11 and have a Microsoft NLB problem requiring a Static MAC address configuration to fix the problem..I have tried to apply the command: - mac-address-table static 02bf.0a...

Hello Freindzs, Is there any tool by which we can know the following:-1) the type of type and product (i.e for eg:- Cisco switch 6500) during trace with their respective IP / HoP.2) How can we find out the throughput of any device in WAN , any tool.?...

Hi I have been trying to connect ISDN BRI to one of my Aggregation Router having PRI installed but am facing problemISDN Q921 is OK but when checking for ISDN Q931 debug it gives o/p as followsJAM-BBI-R01#p 172.X.X.X Type escape sequence to abort.Sen...