Routing

folksi need to secure a 3760e but can't find a document detailing the processi have a nsa guide but its old and i'm not sure how much is still relevantcan someone send me a link or recommend a document?thanks to anyone taking the time to reply

Hi, I have a problem with a GRE tunnel between 2 sites by SDSL 512kbps, GRE traffic increases dramatically and saturate the link with "Fragmented IP protocol" 1514octets, how to avoid this saturation?, Which configuration must be added to correct?I u...

guys we are having a big problem and i cant get my head around it.....currently we have two router sin data centre A and B A is cisco 3825 router and B is 2801 router with 64 flash and 256 ram....now both running hsrp on its lan B is a redundant rout...

Hello,I would like to configure 1811 router as a RAS server for dial-in users. Did somebody manage to find the documentation for this configuration and can share the link?Thanks a lot

HelloI have a 3 site WAN. Site 1 & 2 have a cisco 871 router each which connects to site 3. Site 3 has an ME3400. All three sites are linked via a WAN so there's no internet.I am wanting to enable VPN on each device in order to protect the traffic. W...

I have a central location and four remote locations with a router at each location. I will have private leased lines for main WAN connectivity. I will also be using IPsec over GRE for VPN backups from each location to the central location over the pu...

I have researched the hell out of Cisco's website and I'm still having trouble with making the right choice.There will be 5Mbps links from the remote locations to the main location for a total of 20Mbps of WAN bandwidth being handled by the headend r...

I have a Cisco 2600 with multiple inside VLANs. How would I limit the usage on a specific VLAN?Using 4250 out of 29688 bytes!version 12.1no service single-slot-reload-enableservice nagleservice tcp-keepalives-inservice tcp-keepalives-outservice time...

What is the difference between a 2821 with Version ID (VID) of v03 and one with v01?

Hello,I have a router 1812. I have access-list 104 applied on my outside interface, inbound direction , that denies all traffic coming from Internet. I have this log :%SEC-6-IPACCESSLOGP: list 104 denied tcp 218.234.21.153(6000) -> 89.149.2.175(1433)...

HI 1. I just got my own ip space.is it possible for my existing ISP to broadcast this new ip space without AS NUMBER and BGP Peering ?2.what are the requirements to become an ISP?ThanksThanks

Hi Team,We are getting a plenty of output errors & output drops on the Gigabit ethernet interface from which our one server is connected.Moreover, it is continuously increasing. What things we need to do to get it fixed.