We have a client who would like their remote sites to send all http and other traffic through hq router.They also have applications such as inventory and sales using the same link to hq.On the access-lists I have deny all traffic from been NATd on th...
hi,I'm getting confused while trying to understand the relationship between PPP Multilink, dialer load-threshold and dialer idle-timeout here.here's the DDR dialer profile configuration :interface Dialer200 description **** Dialer SSE 1 **** ip addr...
All,I'm having a hard time understanding something.If I have a router that is an ASBR and an ABR that lies on area 0 and NSSA area 1. This router is redistributing EIGRP 100 into OSPF. The router in area 1 is seeing the redistributed route as an N2 r...
Is it possible to associate object tracking IP SLA with BGP conditional advertisement?If I only use the BGP conditional advertisement then I will still need to wait for the route timeout but the user application can't wait that long so I am wondering...
not able to find a traffic shaping utility that would rate limit a port of TCP protocol in a GRE infrastructure. GTS would be perfect, but it doesn't work in a GRE tunnel.Any suggestions?thanks, Kevin
I have an ADSL WIC card installed in my router. The ATM0/1/0 status is showing as initializing, line protocol down. Any ideas why this could be happening?Thanks
Many Cisco DMVPN (Dynamic Multipoint VPN)documents refer to NHRP (Next Hop Resolution Protocol) as the routing protocol to be used with dynamic IP addresses on spoke routers.If I am using static assigned IP addresses on the spoke WAN facing interface...
HiI have a small ISP network.Lately I have had some problems with clients having viruses and worms.This causes a lot of "problem" traffic on the networks.What I do is log the traffic with Wireshark, and inform the clients witch seems infected.But may...
I'm currently using two Catalyst 3560 as L3 devices to build my GRE tunnel. Attached are 3 documents; GRE diagram, config on SA1router and config on MSrouter.Question: Why do tunnel interfaces goes down when keepalives are set? When I remove the keep...
I want to route a specific host (10.1.0.26) on the inside network out the DMVPN (Interface Tunnel0) instead of using the BGP network. I have created the following commands on the router:route-map WSUS permit 9 match ip address 150 set interface Tunne...
Can someone who knows IOS XR help me with creating the equivalent for this? I have this programmed in IOS:route-map KMA-AGGS permit 10 set community 20115:3000 20115:63004router bgp 99999aggregate-address 10.158.32.0 255.255.240.0 route-map KMA-AGGS...
Dear All,Please tell me how i can know the serial number of my cisco router by CLI...i used show tech command but its running so fast i m not able to read the serial number....Can anybody plz tell me a short command to get the serial number of my rou...
