Routing

Hi,I am trying to clarify whether the BE class will drop down to nothing before traffic from AF classes starts dropping (highest drop precedence first, of course). This would mean an important but greedy application could kill all general network tra...

Hi,Is it possible to enable netflow on cisco 2960

Hi ,Can any one guide me how to configure swithports for multiple vlan membership.RegardsRaahi

Hi,i am facing a problem with the VWIC-2T card.i am having 2 links connected to the 2 interaces controller 0 & controller 1,while pinging i am getting drops.but when i swap the cables on the same interfaces i am able to ping.i am suspecting a problem...

I would like to get an email alert when a configuration change has taken place on my cisco router or switch. It should be able to tell me which IP address made the change. Free tools are welcome

i have cisco 1800 series router, with 2 isp connectivity (intenet Leased Line).1 isp ----> 2mb serial link2 isp-----> 2mb fiber (ethernet termination ) link.i need to configure load balancing and automatic failover between these to links.i need a hel...

Is it possible to create a second BGP process with a different AS#?I have a remote router that I would like to change the AS# to be the same convention as the rest of our rremot sites.The only way I could think to do it is with a second AS# with the ...

As per all docs, multi-area OSPF reduces Link state database on a Internal Router.But if I don't configure summarization, Stub, Totally stub kind of features, then on a vanilla multi-area OSPF topology below will happen"Internal router will have less...

Hi Sir Concerning the hardware, we have two cisco 3825 connnected via a WAN. Just call them router_1 and router_2. We use two laptops to configure it via telnet, using putty. Concerning the IOS, it is a 12.4(24)T.We have configured in each cisco, two...

Hello I am facing issue with RIP, i am advertising a subnet from two routers at same site with different metric but the incoming traffic is prefering the higher metric path for that subnet.to give it a temporary fix i remove advertisement from second...

Hi,can anyone tell me how to find the serial number of VWIC-2T card from router

CPU utilization for five seconds: 78%/2%; one minute: 77%; five minutes: 78% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 47 3280182123005882357 109 51.19% 51.08% 51.29% 0 Cat4k Mgmt LoPri what's the reason for the...

Hi,I have an ATM on 2800 Series, configured as follows:Router#sh run interface atM 0/1/0.1Building configuration...Current configuration : 290 bytes!interface ATM0/1/0.1 point-to-point mtu 1500 bandwidth 1200 ip address 10.100.0.22 255.255.255.252 ip...

guys we have a pc which up loads and downloads files to a remote server at the other site....both the sites are connected via FR link....customer doesnt want permanent VPN......now only one pc does the uploads and downloads.....there requirment is t...

Hi all,I am trying to configure a VPN server using SDM on my 837 but doesnt seem to work. When I click the "Launch Easy VPN Server Wizard" button the wizard doesnt come up, im wondering if its due to the IOS image on the 837?Im currently running flas...