Routing

Hi, I have 6500Cisco switch having one FWSM module. I have configured multiple context in that. I want to take backup of those context as I am going to update the IOS. How can I take the backup of all Context, Please help me. One thing more, how can ...

I have a router that is running both BGP and OSPF.BGP is learning the default route from its BGP neighbor.I was going to redistribute the default route into OSPF with a route map and the “redistribute” command but I noticed that once I configure...

Any idea on how to avoid problems when the public IP change, cus when it happens the routers stay with the old IP and the internet service is lost.

Hello,We recently had a P2P circuit installed. The US side is a T1 and plugs into a 2811 with and an integrated CSU. The Holland location is a DSL line terminating into a Quick Eagle 4200E. The hand off to my LAN is via an Ethernet connection. Cu...

We connect our branches with Cisco 1841 ISR routers by using VLANS on 4 port HWIC cards. It seems to me that we should be using the local ethernet ports on the router to route the WAN traffic and not the HWIC ports. If this is the case, are there e...

I've had ip virtual reassembly configured on my Internet router for quite some time now, but in the last 24 hours it seems that it's causing the router to eventually spike to 99% utilization. As soon as I remove the virtual assembly configuration fr...

Hello,I have a Cisco 1841 Router, with the IOS version c1841-ipbase-mz.124-3i.bin. I have a static NAT entry in the running config, such as:ip nat inside source static 10.0.0.1 77.77.77.77The network layout is attached. Whenever someone in my interna...

HiPlease your help. We need to install Cisco router with two lines ADSL ( WIC-1ADSL)- Loadbalancing - , what is your recomendation and which Cisco model we should use?thanks

Hello.I've link between my 2 office - 100mb.And i need config qos - for phone and buisness.Provider can not help me - they also drop all marking traffic.I want push 100 calls and all critical traffic when i have congestion.But i have no idia - what i...

Hello Experts,We experience the OSPF Fluctiations every 32 Minutes i.e. configured between PE & 'CSC' Router.Note: It's a CSC Setup.Few points are:----------------1) Last Mile is Healthy2) OSPF Configuration are Fine3) No MTU Related issues.Can someo...