Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

I hope someone can help me with this. When I'm looking at top talkers, how can I convert the dstP value to an actual port?For example:DstP 0CBC0CBC is the port. My first thought is:0CBC0 - 4096C - 12(256)B - 11(16)C - 1212*256 = 307211*16 = 1761*12 =...

Hi,I will be upgrading a 7206VXR with a NPE-400 to a NPE-GE1. Will I be able to swap the hardware and just copy / paste the config without any syntax modifications or other changes? Sorry but I do not have experience with this or have the resources...

Hi,I do have nation wide network, and Have two datacenter located in two different place, so can I have my east part site having communicated with eastern side datacenter and same thing for the western side. and can i put my webservices or any applic...

Hi every body!Let say we layer 3 switch with following entry :10.10.10.0/24 via 10.10.10.2 f0/1further assume switch does not know the mac for next hop(10.10.10.2)Will we find punt adjacency because the packet destined to 10.10.10.2 must be forwarded...

sarahr202 by Level 5
  • 17291 Views
  • 6 replies
  • 0 Helpful votes

Hi There,I just like to as if its possible to configure to a router 2 protocols like BGP on WAN and EIGRP on LAN side.Can I also ask for a sample configuration of it to see how its being set or configured on any typical routerThanks,Dyep.