Routing

Hi, I have the following scenario: site A- OSPF distribution routers -----BGP CE---MPLS cloud------BGP CE----OSPF distribution routers- Site B. BGP is selectively redistributed into OSPF. However, OSPF redistribution into OSPF is NOT allowed. How do ...

Should I be concerned with three of my interfaces on my core router (atm, GB, and Fast Eth.) flushing on the input Queue. The GBit interface has flushed 230,000 times in 7 days, atm a little over 10,000. No errors listed.Thanks

Hi,How does rip v1 deal with fixed lengh subnneted networks,and variable length subnetted works.? Thanks & Regards,jerry

I just need to set-up my 1811 router to connect our LAN to the internet through our ISPs T1 router. It has a static IP address and we have a range of IP address that we may use without NAT. I have established a static IP on the FE0 interface and set...

Hi All,OSPF config on one of the routers..************************************router ospf 100 log-adjacency-changes area 0.0.0.0 range 10.40.11.0 255.255.255.252 area 0.0.0.0 range 10.60.0.0 255.255.0.0 area 0.0.0.0 range 10.100.10.4 255.255.255.252 ...

guys suppose we have 2 routers A and B.....both are running RipV2. Now if i want that router A should not send any updated to B but A should get all the updates (routing) from B how can we do that.....do we have to use distribute list or is there any...

Hi all,I've this scenario:client ---Router---web serverI'd like to configure a policy with a class that match protocol http url (NBAR) and apply it outbound towards web server on Router. The question is: does it match only the http request for that ...

when i try to start my 2800 router by console its can't start and showing this massege ½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý½ý why?pls help me.

Hi all,I think I can do this but I would just like confirmation. I would like to delete the sdm stuff below.....Test Router>sh flash-#- --length-- -----date/time------ path1 1823 Sep 20 2006 14:57:56 +01:00 sdmconfig-2811.cfg>>>>delete2 ...

Hi,We have multiple routers in our network where SNMP servers are polling the routers links. The server is polling CPU and link utilization of customers. Now a days we are observing high CPU on the routers due to SNMP. We suspect the servers are requ...

We will be upgrading our branch offices from a Single T1 to x2 T1 connections.We have VoIP implemented in our branch offices.I am wondering if I need to be concerned about making this change to the interface.The current config is shown below, is the ...

Can I know what are the disadvantages of using cisco equal cost load balancing?

Good evening!Could you help me?I need to insert these DNS inside my rooter:DNS Primary: 193.70.152.15DNS Secondary: 193.70.152.25In the gateway instead of using DNS(primary and secondary) I want to insert this another one: 10.10.10.1 (Cisco IP addres...