Hi,How does routemap-entry-timeout option of ip nat translation command work? Can it be used with ESP translations? show ip nat translations verbose shows,Pro Inside global Inside local Outside local Outside global--------------------...
Hi,I have a 6500 with a SUP32. I am expecting delivery of a high speed fan tray and power supplies within a few days. However I need to upgrade from hybrid to native mode IOS before then. My system keeps shutting down on me with the following mess...
Refer to below class-map, for MPLS network.If the MPLS label which have EXP bit set to 2 and the IP packet reside in the MPLS packet, have DSCP 34.Will this match ?class-map match-any GOLD match ip dscp 34 match mpls experimental 4
Dear sir,we have a basic question if this is wrong dontmind and reply plz If any router up to what leval it was secured.how can i see the security leval.Thanks&Regardssrini
Dear allI am experiencing high CPU on 7609 SUP720.The process causing issue is not even showing on below output.Any thoughts ?TIASamXXXXX#sh processes cpu sort | exc 0.00CPU utilization for five seconds: 98%/87%; one minute: 54%; five minutes: 25% PI...
We are one of the service providers having both static IP and DHCP customers... One of the BTS sites we have deployed a cisco 2960 switch to which BTS is connected through which DHCP customers connect..On the same switch a few static IP customers a...
Hi Experts,I have one issue here.. There are 2 routers and they are running HSRP on the fast-Ethernet.THe NAT config is "ip nat pool CISCO x.x.x.x y.y.y.y netmask 255.255.255.0.ip nat inside source list 21 pool CISCOaccess-list 21 permit z.z.z.z The ...
I have a DC-DR setup with redundant links and routers between them i will be using OSPF routing to achieve ACTIVE/ACTIVE routing on both the links what i need to know is will enabling CEF load balancing per destination on my L3 create asymteric routi...
Hi,I have a 3845 router with SDM installed that allows only one-time use of "cisco" as username and password. Unfortunately, I didn't get to change the username and password prior to logging out. Is there another username/password I can use to regai...
Hello,I am having trouble getting information.I am installing a new network with a business class cable modem with 8mb DL, and 2mb UL...Will the 2821 ISR handle this for my network?Thanks
Hi Guys,I have configured VPN and want to use internet via same link. I can ping any public ip from router, but can't ping (get many loses) during ping from inside host.I have attached my config file..I hope you guys will help me finding my configura...
I am seeing the following from multiple routers:WASE520CE2#sh policy-map int mul 1 ou class class-default Multilink1 Service-policy output: QOS_OUT Class-map: class-default (match-any) 135086302 packets, 55933251373 bytes 5 minute offe...
I want to downgrade the current version of IOS software on my Cisco 877w to IOS ver 12.3(8)YI1. I have got some applications which dont work properly with the latest IOS. Where can I obtain these IOS images from?
Hi, I have Server 10.10.1.5/24. Desktops on network 10.10.5.0/24 should access all the application installed on the server. The services are using TCP and UDP ports.If I will open IP any any in ACL and rest Deny. It will work or I have to open TCP an...
