Routing

I am trying to apply two ACL to one of the VLAN but it seems that the "in" option is denying incoming packets because when users from inside my network are initiating connection to the other LAN, they open a random port and that is the port that the ...

Hi,Is there an easy way to find out whether commands are on or off by default in various versions of IOS

I am receiving the 10.1.0./16 route from 12.0.0.1 via the interface Serial0. not sure what 0.0.0.0 is about!0:13:37: RIP: received v2 update from 12.0.0.1 on Serial000:13:37: 10.1.0.0/16 via 0.0.0.0 in 1 hops

Hi,We are using DELL-PE7250 servers, we are finding servers(10.37.32.2) are keep on sending UDP packets with port no:1228 to our Broadcast IP(10.37.32.63). Can we know what is the use of this packet and how to stop? Pls find in attachment-captured pa...

Hi,Can any one help me how to enable SNMP on Cisco 2950 Switch.RegardsKiran Kumar Ch

Hi, I have two remote location connected to MPLS cloud .Both are locations have severs those are running heartbeats to check the connectivity can I go for RSVP to reserve some bandwidth for heartbeats . Incase RSVP is right options what will be the c...

I know CIDR can be used to aggregate multiple classfull networks. Is the use of supernetting recommended to "build" a larger network by changing the subnetmask of multiple class C networks. For example I could change the subnet mask on hosts in class...

Does anyone know of a USB-Serial adaptor that supoorts Cisco's Break Sequence (Control-Break)?Please specify whether it works for PC and/or Mac..Thanks..Rob NockowitzCCIE #15410

I am constantly seeing "EM Event: Id:5048, Line#2631:Try to query an invalid ppp : bay.ppp = 0.511" messages in MGX-II on my MPSM-155 card. I don't see any impact but anyone has any idea?

Hi guys, I was wondering if I could achive path redundancy for xot. Assume that I have network redundancy configuration (2 routers at each site) at a couple of sites. A node is connected with a primary and seconday serial interface to both routers at...

Hi,I am having a very strange situation at a client site where i have recently installed a IP over Frame-relay for Internet Access for LAN users. the configuration of the IP/FR has been done on a cisco 805 series router. the weird thing is that i can...

Hi All,Just want to clarify something regarding EIGRP interface-passive command. I made serial0/0 passive in eigrp, but i can still routes passing to the serial link. Do i need to make the serial sub-interface passive rather than the serial interface...

I am having trouble getting a 1841 with WIC-1T to work with a t1 line. I had 2501 setup the same that works fine. Here's SH INT for 1841. Currently not connected.Serial0/0/0 is down, line protocol is down Hardware is GT96K Serial MTU 1500 bytes, BW...

i m trying to block the youtube on my network. I have confiugred the following things on my internet router.class-map match-any youtube match protocol http url "*youtube*"!!policy-map p2p class youtube dropinterface GigabitEthernet0/1ip nbar proto...