Routing

I am on my way to several Cisco 3200 series routers and need to know what kind of pin out I will need for the serial cable used for Console access. I can not find this information anywhere in the manual. I know the interface is a female DB-9. Can any...

I am having difficulties understanding the following config as I don't have the ISDN equipment to test on :( I apprecate it if someone can explain it to me.What interested me is the ppp and aaa authentication, are they correct? I created 2 groups (on...

We have Cisco 2801 router and VWIC2-2MFT-T1/E1 card. A year ago with Cisco support I configured this devices working with 2 T1. For long time, I could reboot the router and was no problem. Recently, each time when we reboot the router, the configurat...

say i get my own PI address space from Ripe and would like to multihome with two different ISP without using BGP, just have a default route to both ISP. How will i advertised my space on the net? Can i use on PI Address space between both ISP's?. The...

Hello,I work for a school district and we connect an off campus building via 2 - Alvarion B100 5.4 or 5.8 Ghz radios. Sorry I'm waiting for an answer from our vendor re: which they are. We run VOIP and Data over this connection. The VOIP quality st...

Hi,My company has 2 large sites with internet access and 2 small sites with NO internet access. All of the sites are connected via an MPLS cloud. I would like to inject the default routes from both large sites into the BGP MPLS cloud and configue the...

Can I use a HWIC-4ESW= 4-port switch card to connect 2 fiber links (already converted to ethernet) into a Cisco 2811 router? I need to configure the 2 links for load balancing and failover.I have been told by my reseller that I need to purchase an L3...

I plan on being the 'redundant' link for a customer that has a class C assigned by the primary provider. I planned on just using a /30 to peer and advertise that I'll take his class C and route it to him at the other end of the /30.The Boss was discu...

Is it possible to add a description to a tracking object?Thank you

I had created a sub vlan and deleted the Vlan.But still when iam giving "sh ip int brief" it still showing.ow to remove it permanently ?Vlan5 x.x.x.x YES NVRAM up upVlan5.1 unassigned ...

Hi have a problem here I have a 3845 router and I'm doing a NAT but for some reason the translation is not taking place. What am I missing here?ip nat inside source static 205.248.197.51 192.168.5.246 route-map ZNET-nat extendablenow I have a quick ...