Routing

Hello,I have uploaded a different IOS to a switch within a test environment for testing purposes, and happened to notice a specific message on the console. I upgraded from an IPbase code to an IPServices to enable routing functionality on a 3750. Has...

We have two analog phone switches currently connected together via a point to point private T1 line. I would like to replace the T1 between the switches with a pair of Cisco routers and IP network connection (we have plenty of bandwidth for it). What...

Hi AllI wonder can someone point me in the right direction please? I am trying to configure a Cisco 877W (Adv IP Services) as my home Broadband router. I have it configured where it is working for wired connections. I am trying to connect via SDM to ...

Hii just got my cisco lab companion books as my next aim is to have my CCNP done in this year I am just confused about the equipments mentioned in the lab companion book which are a way over my budget for example the BCMSN book requires 2 3960 switch...

hi i have group of users who are using internet througth PAT, now some of the users trying to cunnect VPN servers over internet, problem is that the only user who is connecting the VPN server first, is able to get the VPN authentication, IP addresses...

Hi experts,I have a question about BGP convergence time.Consider an MPLS core and a customer on his own VPN (VRF) across the ISP's core network.CE to PE is eBGP.When I remove a route on the CE router, the other CE router (across the Core) detects it ...

I have a new 3845 router that comes with a 2-Gig ethernet interfaces and will replace an older router with dual ethernet interfaces. My dilemma is that my current production router has dual ethernet intefaces, one is dedicated for the production LAN...

Can someone suggest a high level Data Center EDGE Router utilizing multiple BGP feeds?Can someone tell me the difference between a 7600 and 6500 would be when choosing a Data Center EDGE Router/s?

I have a 7206VXR [ver 12.3(6b)], that is used as a DSL concentrator at an ISP. Interfaces are defined as:interface ATM2/0.420 point-to-point pvc 0/919 encapsulation aal5mux ppp Virtual-Template2!interface ATM2/0.421 point-to-point pvc 0/920 enca...

hiwhat is the process for migration CCM4.x to CCM6.0??thanks

I have new 2851 with 12.4. I installed a vwic 2mft-t/e1 card but can't configure. I don't have the service-module command of a serial interface, what am i mssing?

Hi,I find that the length between far end LAN port to the core switch is over 100M. Can I use Cat 6 cable to overcome this issue? if not, any work around? e.g. put two or more switches in between? BTW, the 100M limitation is end-to-end (from end user...