Our network is divided into two parts (each part is managed separately). Long ago we decided to merge our routing protocols using OSPF. Our side has seen some issues with OSPF because of its inability to load balance the way we want. For example: we ...
Hi,we have some strange situation. According to the documentation the GRE traffic on SUP720 should be processed in CEF mode. But If I look onto our graps I can clearly see that there is a dependency between amount of GRE traffic and management CPU l...
While running a basic ping to data center site, i get full pings not delays,Ping 192.168.10.10Reply from 192.168.10.10: bytes=32 time=35ms Reply from 192.168.10.10: bytes=32 time=35ms however when i run a traceroute, i get request timeouts but the ne...
Hi,I am having a problem with a TCP session staying open on a server. The session is a FIX (Financial Infomation Exchange) session. Here is a synopsis of the problem.We connect to a order routing service via BT Radianz, they NAT our internal privat...
I have 3 1DSU-T1V2 cards in HWIC0-2 slots and tried to plug a HWIC-1FE in the HWIC3 slot but it is not showing up. I have upgraded the IOS to 12.4(12b) from 12.4(3g) but it didn't help. All the lights are green but it doesn't show up in either the ...
I have a 7204 router description with a reference PA-E3-CPE that I cannot find in the CISCO site (only PA-E3) -with the exception of two search results. Is it the same model or is it an obsolete card ?
Hi all,Please take a look at the Figure 9. GLBP Deployment, Small Remote Site.http://www.cisco.com/en/US/partner/products/ps6550/prod_presentation0900aecd801790a3.htmlAssuming that the server is located behind the 10.44.11.0/30 and 10.44.12.0/30. The...
m getting thousands of hits on IDS with ospf packey length mismatch between two cisco routers..please let me know how to stop this...thanks in advanceregards..manik...
Is there anyway to verify the download and uprate speed on a IPSEC tunneel have going from our branch to our data center?We are utilizing cable internet service.Also...what would be the most efective way to test the pipe with load?
i have a 2811 router with a bvi interface with bridge-group f0/0 and vlan1 which vlan1 has clients connection to the network. Is it possible to have all the client(fa1/1, fa1/2,etc..)traffic pass through fa1/7???
Hello Guys, I am attempting configure Frame Relay on my 2 router. I have 2 serial cards only. Evidently I am not doing something right. I need to know if anyone has any documentation on how to configure a point to point using Frame Relay be...
Hi,I'm a little confuse and I don't know how it can be possible to do something with 2 distant sites linked with one NIC at each side.My first react was that I need to have 2 Nic and for best availability 2 link but my client have only one.So at each...
