Hi,What is the advantages and disadvantages of configuring EIGRP MD5 authentication on the EIGRP network.Pls suggest it to implement on my network.regdsNasheer
I have Cisco 837. By accident the ios image is erased. I guess that the only solution is: using xmodem to upload the ios to the flash. Could someone tell me how to do that? Is it possible to do it by using Hyperterminal and how?Thanks in advanced.Pet...
we are installing a 6509-e,sup720, upgrading from a 6509 sup2, moved every over to the new 6509-e but when we break the fiber like bewteen the two and change the route statements for the new one we are unable to connect to the internet, but as long a...
I have a DS3 circuit that is high powered causing errors on the circuit. Can someone point in the right direction to buy attenuators? Cisco does not sell attenuators anymore.Thanks,
I am trying to setup load balacning and failover over two WAN links on my 1811. One provider is cable and the other is dsl. Each has a modem and no pppoe/authentication is required. Also I have a single static IP from each ISP. I have a vlan that...
Respected,I need to create TCL script on my 1841, which will check status of dialer1 interface, and if protocol is up and interface is up, then it will delete all local vpn sessions.Anyone who can help me with this? I never do anything similar….
Hi guys, one of my colleague has the job of maintaining the downtime sheet of our branches, its very difficult since the number of branches are large, i want to ask the experts here that usually what procedure they follow, what we want to document is...
I have a 7206 connected via vsat to my remote office's 7206.At both end E1 are terminated on a FE-converter from there i get an FE on my router fast Ethernet.The vsat link is 2Mbps.i have a bandwidth problem.Whenever i ping with 1000 bytes from this...
I need assistance in figuring out what is going on with a Sprint DS3. I called Sprint and they said they had a problem, but now it's fixed. I noticed at first the interface was flapping, but now it's just down. I've inherited this so I'm not at al...
If we have an access interface with:Cir 384KAccess 512KTo use all of bandwidth (if available) I need to configure a shape peak but shape peak is 256 or 512 ?I'm asking because if I configure 512, the output of "show policy map int X" show's 1024000/5...
Have just configured a cisco 877 however I am having some DNS troubles.The adsl connection seems to work fine as from the router itself I can ping internet addresses and resolve URL's.However the computer that is using the router as its gateway does ...
