Routing

I cant remember if this is the case or not, but I have a customer that has a t1 to another remote site. They are adding another remote site, so my question is this: when adding another remote site, do you have to have another t1 at the main site, o...

Hi - I didn't see this topic addressed anywhere in this forum, so I thought I'd start a thread here. I'm seeing several companies advertising "Cisco-compatible" SFPs, most prominently Transition Networks. Are these SFPs either endorsed by Cisco or ...

Guys,If I have 4 queues on a 4948 port and I want to put EF in Q3, AF41 in Q2 and BE in Q1, using the cos-map config, how can I ensure that Q1 is going to drop packets under congestion before Q2 and Q3 start dropping?I only thing I can see is the sh...

hello,i need to setup a fresh network using the following devices:ASA 5520 and 2821 router.The ASA 5520 sits in front of the router cos i need to do some voice on my LAN,permitting everyone(data AND Voice traffic) to the Internet but resticting some ...

I was doing a trace route from my machine to a particular website through windows xp, and I noticed some private IP addresses showing up in the trace, so I am just wondering why would 10.*.*.* ip address show up on the internet, I have never seen tha...

Hi,Due to mem issue, I would like to download the retired IOS version (e.g. c5400-is-mz.123-14.T3.bin). How do I download it? there is no link to download but with the name only.regards

(Lo0,Lo1) R1----OSPF(Area0)---R2I have 2 routers as shown above .there is ospf routing protocol.I used distribute-list on R2 to prevent Lo0 to be installed in the routing table of R2.is there another way to prevent the Lo0 other than the distribute-l...

hi,what is main difference between ip default-gateway and ip route...as they are for the default gateway functionality...in which situation i should use ip default-gateway and ip route...regardsDevang

Hi,What is Reverse route ?Can anyone tell me with example routes.regdsNasheer

Hello Experts,What is the difference between "Deny" Sequence in Route-map AND ACL with DENY Statement.>>Consider i want to match "ip address" 199 in route-map "LOAD-BALANCE->GURGAON"Que:-------1. ACL also has Deny Statement2. Route Map also has Deny ...

I wanted to setup backup connectivity over PSTN using aux port of router between two site.How can i do that?

Hi All,Please share yur observations and comments to improve the BGP convergence time. Although the standard time is 180sec but is there a way to make it instantaneous.please share.

ISDN Problem , I can't to send data site 2 site help me pleaseRouter 1841 ================== Router 1841 bri0/0/0 bri0/0/0 192.168.1.1/24 192.168.1.2/24I am verify config and debug i think it work but i can't ping from my p...

Hi,Currently we have NM 4 T card on cisco 2651 XM router.As there is no emty serials.I want to replace with NM 8 T card.Does NM 8 T card supports Cisco 2651 XM router.rgdsNasheer