Routing

Guys,i have a request from a customer and am not too sure how to go about it. they currently have a frame-relay point-to-point network. now head office is going to increase their bandwidth so the provider told them to do the following1. add a second ...

Hi guys,I am using SDM for checking the CPU utilization and Memory usage.But when i check the INTERFACE STATUS in MONITOR mode, Only GigabitEthernet interface is showing with its bandwidth utilisation not any Serial Interface is displaying.I want tha...

I am considering what happens to multicast routing in frame-relay hub-and-spoke topologies.As I understand it, there are two problems to be overcome when doing multicast in hub-and-spoke. One is that the multicast router will not forward a multicast...

I can't remember I had this problem before but every let's say 5 minutes I must close the PDM and re-login in to the PDM before I can make any changes again or save the configuration. It also happens when I'm NET idle for a long time. Is there a Solu...

I'm running a Cisco 7604 with 122-33.SRB1 code. When I look at the routing table, I notices a new code. Does anyone know what this code means?ROUTER#sh ip routeCodes: L - localL 172.26.8.25/32 is directly connected, Serial2/1/0.858

Hi, I have a Cisco 837 in VPN mode, I've noticed at nearly every minute the following is displayed on the console, what is it and can I do anything:Nov 7 15:03:52.032: Vi2 PPP: Outbound cdp packet droppedNov 7 15:04:52.037: Vi2 PPP: Outbound cdp pa...

All,Just need a little clarification on the doubt that I have with FRTS.1. Do we enable " frame-relay traffic shaping )under the FR interface only with legacy FRTS config. 2. With MQC FRTS we dont need the "frame-relay traffic shaping command" under ...

Sorry for posting on wrong forum but i did not get any response from windows forums.I have a cisco vpn router 800 series connected to a windows 2003 terminal server. The server has two NICs. One NIC is connected to my LAN switch and the second NIC is...

Hai...can someone explain to me what is the different between logical and virtual router...??any different. TQ

Present setup We are having 2 DS3 circuits from India to US. One DS3 from India to Alpharetta and another DS3 from India to Cincinnati. Presently, whenever ether of DS3 links goes down the other will handle the voice and data traffic. Proposed setup...

Hi Could any tell me whats the meaning of this alarm which i observed on my MGX .08A70237 08/17/2006-06:40:18 PNNI-7-PNNI_INFORMATIV pnPnni pnni_log PnNet/PNNI/pnni_delete_summary_address - summary address not exists08A70236 08/17/2006-06...