Is there other possible way to connect another network from a remote site with conflicting ip subnets with the local network without using nat?
Is there other possible way to connect another network from a remote site with conflicting ip subnets with the local network without using nat?
Hi I have a special condition and i need repair this sitiation...i have a 6509 directly connect with cluster firewall checkpoint .. the firewall send to 6509 many networks to 6509 but 1 network appear 2 times in route table with the same next hop b...
On r2851 - 12.4.17 AdvSec there is a Serial link with Multilink (due fragmentation for VoIP) and backup ISDN-BRI line. When we shutdown the Serial IF, backup ISDN comes up. When we bring Serial IF back to up with no shut, IF comes up but protocol is ...
i have 2621 and all of sudden it will not load the ios. it will continue to boot in a loop with this message below..*** System received a Bus Error exception ***signal= 0xa, code= 0x200, context= 0x80997c98PC = 0x800238e8, Vector = 0x200, SP = 0x809d...
Is there any way to load IOS from rommon ("switch:" prompt) if the bin file is missing or currupt other than xmodem? Can you boot from another stack member, or set up a tftp load like you can with a router by setting environment IP and TFTP variable...
HiI would appreciate if someone could please answer to following question:What is the speed (MHz) of device Cisco 871-k9?Thank you, Susanne
Cisco Recommends to enable UDLD on etherchannel and Loop Guard on Non designated ports(Root and backup) . if there are 2 core with STP loadBalancing so the EtherChannel will be No-designated for some vlans So my questions is that Can i enable both o...
Hi,I upgrade the IOS on my cisco 837 router to use the IDS function and after completing machines from the inside can not go to the internet. from the router I can ping out to the internet. can anyone see anything in this config that would be preve...
Hi Experts,There is a connection as attached..Now I am able to test from 2950 to 3750 redundancy link failure, but am wondering if let's say point A has failed, how to make the traffic routes to the other C4506 Core Switch 1?? The traffic is currentl...
Hi All,Does anyone have a view on the best method for traffic shaping on a 4948.I have a CE router connected into a carrier cloud at 1000M and am buying a 10M service, carrier uses policing on their PE.Now, how do I shape down to 10M on a 4948 inte...
Hi We have a company policy over the next year is to centralise all file and print to the data centre (were all applications and citrix servers are currently located) and remove all servers from remote sites.From a desktop point of view the plan is t...
i want to use 3845 with 12 X wic-adsl, and 12 dialers with 12 vrfs.can the router deal with it?
Hi, I'm just wondering if this is possible or what other choices I have.I have many 800 and 1800 series routers in small offices that are in VPN mode that connect to a Cisco concentrator.We have a Cisco Pix firewall (soon to upgrade to a ASA 5520 hop...
O.K weird one, the active Route processor seems to crash and switch over to the standby processor when ever i try to remove an non used ATM interface...?? anyone seen this behavour before, bcause seems like an IOS bug to me?
I would like to create a lab to help with my certification studies. As part of my lab I have two Cisco routers (1841 and 2524 each with a 56k built-in WIC. I know frame-relay would be tough to emulate without a 3rd router to act as frame switch. Ho...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-27-2024 07:51 PM | ||
04-26-2024 09:18 AM | ||
04-26-2024 07:58 AM | ||
04-24-2024 03:30 PM | ||
04-24-2024 03:57 AM |
User | Count |
---|---|
11 | |
9 | |
5 | |
2 | |
2 |