Routing

hi all,Actually i thought of learning PPPOE, as its small topic in CCNP. i would like to know:1.what exactly it is?2.In which situation i can use it, and its advantages & disadvantages?3.if you have leased line connection:we generally use router w...

Hi,We are implementing SSH onto a client site most devices are capable of ssh version 2 and are working but we have 2 old remote Access Routers (3620) running c3620-ik9o3s7-mz.123-22a.bin which only supports version 1.Can anyone confirm how to get th...

Any idea what IOS train I would find 32bit AS number support in?

Hi,My goal is to cause a route change based on a MOS threshold violation for the following:ip sla monitor 11 type jitter dest-ipaddr 10.200.200.101 dest-port 16486 codec g729a tag VPN-SF-Boston-VoIP-UDP-Jitter-SLA frequency 30I am unclear how to do t...

Dear,I have tried using RADIUS server to apply rate-limit to my ADSL coustomers using :rate-limit output access-group 101 1024000 6000 512000 conform-action transmit exceed-action dropi applied this at raduis server at my output interface but i does...

Hi,I've just been given a possible solution for mapping a range of ports.ip nat inside source static 192.168.16.12 interface dialer0 route-map STATICRANGE extendableOn the 12.4(4)T2 release for the (C870-ADVIPSERVICESK9-M), this doesn't seem to work...

I wonder if anyone can assist me in this matter. We have 2Gb fiber runs coming into our data centre racks. I wish to plug one into one switch and the other into another for redundancy. Currently the switches are not configured and just standard. ...

Hi Expert,I have a few question regarding the HSRP configuration. From the Internet, I found out that most of the HSRP example involve 2 routers. Let say if I have 3 fast ethernet card in a router. Can I use only one router to do a HSRP for link redu...

I have to connect to my network a group of users that don?t share the same domain. I have created a new vlan for those users (vlan 20). This users can access my printers and some servers so they need to form part of intervlan routing. but ARE NOT ALL...

Hi all,I have a Cisco 2801 with the following modules:1 x WIC-1T1x WIC-2A/S2x VIC2-2FXSI would like to configure my Cisco 2801 in the way such that the serial traffic from Router 1 S0/2/0 will route thru S0/3/0 and out from Router 2 S0/2/0. And traff...

In such a design, can each T1 have it's own signalling, framing and line-code?

I have a setup with cisco1700 series router for 128KBPS leased line in existing office .I want to share this same internet with a branch office .How can I do that please suggest me .For that I have taken 2 mbps poient to poient leased line connection...

hi we have a cisco 877 router connected to internet, some of internet sites not responding when openned , like windows update and hotmail, when enter username and password it will give page annot be displaed. the router configuration is attached.any...