Routing

During circuit outage in desperation we installed a WIC-1B-U in a 2811. The card was recognized, configured and connected. How concerned should we be about problems? I thought it had to be a V2 card

Hi, Have any of you ever dealt with PDSN issues? I have a customer that has a PDSN (cisco). He is advertising foreign agents. However, he wants packets to his roaming partner to be sourced from the VRRP address, not the physical IP address of the ...

Does anyone know why i cannot see serial interfaces on a WIC 2T module inserted on a C2821 router.

Hello!We currently have a HS Internet connection w/static IP address coming into our office & plugging into a Cisco PIX 501. We want to get another HS Internet DSL connection from different carrier for redundancy. 1) Literature on the 1811 indicate...

We are multi-homing between two different providers on two seperate routers. We want to redistribute BGP routes into OSPF, we have done this and it works but the default route that we get from the carrier isn't going into OSPF. I have put in both t...

Guys, Is these babies hot-swapable ? Loc

PLAN- planning to have two (isp) for internet connectivity high availability.- host our own website- host our own mail server- all will be located on a DMZ and will be natted to an external public IPPROBLEM;- 2 diff isp will provide diff block of ip ...

HelloI have a printer on a LAN which had the ip of 10.2.0.6. This ip is currently nat'ed to 10.224.55.129 on the router. The printer ip has since changed to 10.170.20.112. This new printer ip must now be nat'ed to 10.224.55.129 on the same router.I c...

Do the VWIC-1MFT-T1s support PRIs w DID?Thanks

I noticed by accident that some (not all) traffic is passing between my DMZ and LAN ports. I would have thought that a router would not forward traffic from one port to another w/o a rule specifically allowing this.What would be the rule I would want...

Hi all. I have a branch location that needs its employees to have the ability to create PPTP VPN connections to connect to public servers, etc. The 2610 router currently has a box to box vpn connection to HQ. How can I allow all LAN nodes to pass ...

Hi,I have a weird issue . . . On a router connected to a passport via an ATM card, I was seeing the link flapping, and I was able to see these flaps occuring while in the router and in the logs. After checking the interface, I was seeing increasing...

Hi,a vendor want to access my network remotley through a VNC, what is the process to grant him this access.thanks,